blitz

[yonner]

http://www.nemesisperformance.net


goto shop/performance products/electronics/ ecus

if uc ant find it ive copyd and paste it below was jsut wondering if this is a good idea wheter it will be abel to accomidate mods along with raisd boost



"BLITZ Access Exchange ECU Upgrade Mazda

On turbo charged engines, the most common way of increasing power is to increase the boost pressure. This increases the amount of air going into the engine, and providing there is sufficient fuel to accompany the boost pressure, the resultant charge is much denser and provides more power. Standard Engine Management systems have built in boost limits, which turn the fuel injectors off if the boost rises a certain amount over standard. To remove the boost limit, an upgraded ECU needs to be fitted. This will usually allow a 30-40% increase in boost pressure with corrected fuelling for the increased boost. Increasing the boost without increasing the fuelling will cause the engine to run lean, which can be fatal for the engine. The Blitz Access computer does not rely on fooling the ECU with external clamping circuits or making sensors read differently, it properly re-programs the factory limits, and all the fuelling is adjusted accordingly. The Boost limits are raised, the speed limits are removed, the rev-limiters are raised, the timing maps optimised, and the fuelling maps are adjusted to cope with higher boost.

[scooby_si]

PMSL at yer sig http://www.smileycentral.com/?partner=ZSzeb008\' target=\'_blank\'>http://smileys.smileycentral.com/cat/4/4_1_72.gif\' border=0>
So er on subject thou maybe i\'m sceptical but doubt it\'s as good as a total system/ECU take it from that i\'s basically just a piggyback ECU kinda thing. Boost aint the way you can easily go for BHP without many other mods on the 7 thou so wouldn\'t think that\'s the safest way to up the power thing but as i say i no jack just being presumptuous http://www.smileycentral.com/?partner=ZSzeb008\' target=\'_blank\'>http://smileys.smileycentral.com/cat/29/29_1_13.gif\' border=0>
Si

[scooby_si]

blimey looking at the price thou http://www.smileycentral.com/?partner=ZSzeb008\' target=\'_blank\'>http://smileys.smileycentral.com/cat/10/10_3_1v.gif\' border=0>
Si

[Mr J.T]

aint cheap is it:eek:

[bobster]

I wouldn\'t, not at that price.....

But be my guestt and let us know how you get on  

[yonner]

mmmmm might aswell get a pfc and comander and boost controler rather than un that lol if i am maped to 1.2 bar of boost will it b ok to run 0.5 bar???

[bobster]

What turbo ?

[yonner]

hks t04e