Turbo options for a project 13b-REW??

[L18M]

how about a super turbo?
not entirely sure how they work, ie supercharger feeds to intake along with the turbo?
but maybe have the supercharger feeding air into the exhaust side of the tub to help spool it at low revs then at higher revs the exhaust from the engine will feed the tub to get it spooling more for bigger power.

(just remembered you wanted to keep it twins but this might spark another idea off and is something different

[BlitzBoy]

"Super Turbo" seen a few setups like this on a few cars in the US, a small turbo feeding air into the intake of the larger turbo, bit more doable\\easier rather then trying fab up a new twin sequential turbo exhaust housing and far more interesting as well

[turbotoaster]

what size is the system off the supra, i know its sequential, what does that flow?

400bhp is achievable with stock turbos, just wont last forever

[Jono FD3]

Plan is to keep the stock promary in the same place, and then almost top mount the second above it (where a single would sit). Still keeping it all sequential, so yea, your correct blizy, going to be chopping appart a stock manifold to get all the componants out of it, then weld them all in to a custom stainless manifold just to be different

I know you can get 400 from stock twins, but then they are pushing 1.2 bar, and last a week!! what I am after is a safe reliable sequential setup which will reach the same figures at alot lower boost..... probably about 0.8 - 0.85 bar as the stock primary will cope at that pressure!

Jono

[mx1311]

just put a tdo6 on and be done with it as i cant see it working properly dude, if you still wanna scratch your fabrication itch build yourself a manifold from scratch

c