How much would...?

Started by L18M, January 14, 2010, 06:35:32 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

L18M

just thinking, how much would this spec fc sell for?
pondering how much to sell for and what car to get next.
quite fancy a r32 or r33 gt-r, but bit common.
civic fd2, too expensive
ek9 they go for silly money n fwd.
nsx too much $$$
supra too common.
any ideas?
nice fwd, not so common, 300bhp+ atw??
2 doritos on a stick woohoo :rollin

redgti

mazda 323 gtr very rare quite quick with basic mods.

TiddlesRX7

Noooooooooooooooooooooooooooooooooooooooooooooooooo
I don\'t need to upgrade my stock turbo to beat your ass!

Get your finger out, get it on the road and start driving it then!!! (B.Martin 25/2/12)

rx7pat

How about an EK4?

Although I sold mine to get the FC engine rebuilt and a few extra toys! :-)

TiddlesRX7

If your gonna. What about an FD?
I don\'t need to upgrade my stock turbo to beat your ass!

Get your finger out, get it on the road and start driving it then!!! (B.Martin 25/2/12)

lee mills

What went wrong?? Gutted for you.

TiddlesRX7

Don\'t forget most of the work has been done to your FC. If you buy anything else you\'ll have to start from scratch again. How much time/money is that gonna be?
I don\'t need to upgrade my stock turbo to beat your ass!

Get your finger out, get it on the road and start driving it then!!! (B.Martin 25/2/12)

clive

Real sorry to see this thread going on, sounds like this would have been a real good looking car,

How about this ?

I see from above you are talking about an   r32 or r33 gt-r, so how about using the money it would cost to buy this to get another TII and transplant all the stuff your self,

This was you get a car on the road and the parts your waiting for can be put on or in as they eventually appear (hopefully) also this way you do not turn your back on the Rotary friends you have made here on MRC, after all they ain\'t going to recognise you in an old Skybus are they ;),

Hope this helps, trust me, we have all been there !
All the best Clive

papercutout

Trust me, don\'t do it.

I paid £500 for my TII vert, with 2 rotten floors and some minor electrical problems...


Keep the car, it\'s SO close to being done, you\'d be a fool to give up now!

pdtaylor18

tell you what Mate I will even give up any free time I have to get this car finished for you, I am sure between us all we can persuade you to keep the car. After all this at least get the car going, drive it around and then see how it goes from there.
Where is the car now?
1990 TII Cab JDM- Lambo Orange- HKS GT3037 turbo,Apexi PFC and datalogit,Greddy FMIC,Trust coilovers,18" Antera 10J 265 rears, 18" 8.5J 235 fronts

Paypal: pdtaylor18@hotmail.com
Email: pdtaylor18@hotmail.com

Pete[SIGPIC][/SIGPIC]

m1tch

Its at JM garage, I got a text from Liam yesterday, all that is left is the battery relocation, brake upgrade, half cage bolt in and boost controller...plus the car needs to be run in, so won\'t be going on boost or any high speed

Prof

Brake upgrade, roll cage and boost controller could wait until after it\'s run in - not as if you\'re going to be boosting it while you do the run in miles.
 
How long can it take to make a battery box/clamp and run 2 long cables from the boot (I presume that\'s where it\'s relocated too)?
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex


TiddlesRX7

Quote from: pdtaylor18;667453tell you what Mate I will even give up any free time I have to get this car finished for you, I am sure between us all we can persuade you to keep the car. After all this at least get the car going, drive it around and then see how it goes from there.
Where is the car now?[/

This sort of post is why I love this club. Come on Liam don\'t go back to the pistons.
I don\'t need to upgrade my stock turbo to beat your ass!

Get your finger out, get it on the road and start driving it then!!! (B.Martin 25/2/12)

grinder

mate you cant give up at this point - its just madness :(

if i was closer i would offer my time aswell to help out

just dont sell up - its really silly


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

L18M

Quote from: rx7pat;667430How about an EK4?
ek4 still fwd

Quote from: clive;667447Real sorry to see this thread going on, sounds like this would have been a real good looking car,

How about this ?

I see from above you are talking about an   r32 or r33 gt-r, so how about using the money it would cost to buy this to get another TII and transplant all the stuff your self,

This was you get a car on the road and the parts your waiting for can be put on or in as they eventually appear (hopefully) also this way you do not turn your back on the Rotary friends you have made here on MRC, after all they ain\'t going to recognise you in an old Skybus are they ;),

Hope this helps, trust me, we have all been there !
lol, if i could transplant it all myself then i can easily finish it myself lol
but thats the prob, its more a case of: me + spanner = hammer lol
not much point doing transplant as shell is in good condition now and will still have same prob of the odd things or 2 still needing fabrication =(

Quote from: pdtaylor18;667453tell you what Mate I will even give up any free time I have to get this car finished for you, I am sure between us all we can persuade you to keep the car. After all this at least get the car going, drive it around and then see how it goes from there.
Where is the car now?
thanks for the offer pete, very kind and as tiddles said below :)

Quote from: Prof;667456Brake upgrade, roll cage and boost controller could wait until after it\'s run in - not as if you\'re going to be boosting it while you do the run in miles.
 
How long can it take to make a battery box/clamp and run 2 long cables from the boot (I presume that\'s where it\'s relocated too)?
true, but then means car will be away again for god knows how long... =/
how long can it take to make a batt box? hmm, well how long does it take to rebuild and port an engine and fab up a v-mount? 6 months max i would of thought but obviously not. =/

Quote from: TiddlesRX7;667458
Quote from: pdtaylor18;667453tell you what Mate I will even give up any free time I have to get this car finished for you, I am sure between us all we can persuade you to keep the car. After all this at least get the car going, drive it around and then see how it goes from there.
Where is the car now?[/

This sort of post is why I love this club. Come on Liam don\'t go back to the pistons.

still at jm garage. waste of a trip down there yesterday but at least made sure he was working than farting about.
should be started mon eve he said but we shall see ¬.¬
at least its an improvement to "come pick it up week friday"
:Yawn
2 doritos on a stick woohoo :rollin