my rebuild thread

Started by leeincivic, April 05, 2009, 12:43:19 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 ... 7 8 9 10
User actions

DR SCHNITZEL

#105
October 14, 2009, 10:46:17 PM
Brace looks good mate not sure its needed but it really looks the part.

leeincivic

#106
October 22, 2009, 08:12:38 PM
kapowwww!!! :p



gettin there slowly but surely :Thumbs-up

all fitted and bit adding begins woop!! haha
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

batman

#107
October 23, 2009, 12:23:16 AM
looking mental mate think ya need a red annodised pully >:)
REAL MEN PLAY WITH TWINS     :Laugh

BlitzBoy

#108
October 23, 2009, 08:58:58 AM
Quote from: leeincivic;649585kapowwww!!! :p



gettin there slowly but surely :Thumbs-up

all fitted and bit adding begins woop!! haha

put a filter on the turbo dude !!!!!! seen plenty of people break turbos and engine not running filters
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

ronaldlo

#109
November 01, 2009, 12:47:20 PM
look so sexy!!!! u mad lad!!

leeincivic

#110
November 01, 2009, 01:44:16 PM
Quote from: BlitzBoy;649667put a filter on the turbo dude !!!!!! seen plenty of people break turbos and engine not running filters

just a picture piece that dude, would not dream of running without a filter, not after forkin out to get the turbo rebuilt once already haha

got some bling in the bay now too so will post some pics up later:Giggle
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

leeincivic

#111
November 16, 2009, 08:59:33 PM
ola!! right yet again not much done haha, just trying to figure out the fueling and also get me new rad fitted in and inercooler pipes,

fitted some heat shielding around the lim including on the lim to try to keep the heat in order,


oh and also got me snail polished :p:D
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

DR SCHNITZEL

#112
November 16, 2009, 09:39:58 PM
Sweet Potatoes

karl_tate

#113
November 16, 2009, 09:56:39 PM
looks well :D

going to be making some sweet noises :D

what exhaust is on the car??
____________________

Built In Japan - Built Better In The UK

XBOX GAMERS TAG --- tatey1985

leeincivic

#114
November 16, 2009, 09:58:52 PM
cheers dude, at the min its got a blitz nur spec box, unsure on whether am gonna go the 4" route tho, if i do stick with the 3" am gonna get the dragon silenced mid pipe coz am gettin too old for noise haha
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

lee mills

#115
November 16, 2009, 10:01:29 PM
Go 4" mate you wont regret it. My 4" exhaust is miles quieter than my nurspec was

leeincivic

#116
November 16, 2009, 10:05:26 PM
yeah?? alot like? i had been watchin ya thread on fduk but no pics? boooo! haha

did you make it up yourself or get someone to do it? i can only find a place in scotland that will make up a 4" system for me, tis far but could be an opportunity for run in mileage:Laugh
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

lee mills

#117
November 16, 2009, 10:07:52 PM Last Edit: November 16, 2009, 10:08:43 PM by lee mills
Tim @ Rxmotors made it for me.To be honest if you can weld and have access to a ramp it wouldnt be difficult to do. Im just learning to weld so was a bit to much for me:o

leeincivic

#118
November 16, 2009, 10:10:11 PM
ex fabricator so am ok there haha, ya manage to get any pics? what ya run for a backbox?

is it me or is it weird that its quieter with a bigger bore:xconfused
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

lee mills

#119
November 16, 2009, 10:13:50 PM
used 2 massive magnaflow silencers:Thumbsup!.
Did take pics but only with my phone and they came out poo.
Print
Go Up Pages 1 ... 7 8 9 10
User actions