Refurb Split Rims Anyone Here Know Anyone??

[neil_jdmr]

I have a set of CV Pro\'s if your interested but they are pretty rough but not 80mph/7"kerb rough. Iirc the spokes have a bit of flaking paint in the corners and the laquer is coming away on some of the shiny bits and one wheel has a ding in the outer rim but they might be just what your looking for.
 
I was gonna refurb them myself in the same colour scheme you have but getting the time is another challenge
 
let me know mate and ill dig out some photo\'s

[DR SCHNITZEL]

please send photos to kriskinealy@yahoo.co.uk also let me know a price i only really need the outers so these bits need to be near spot on. cheers

[neil_jdmr]

At work till 11pm mate but will send the pics over then, If its mint condition your looking for then you probably wont want these although with that said the outer rims are the best bits and will still polish up but iirc they are are far from pristine.
 
Anyhoo ill send you the pics see what you think, i would be looking for £180 collected or plus-postage for delivery as i was quoted £120 for them to be refurbed so would keep them otherwise and go down that route.

[DR SCHNITZEL]

ok lets ave a look. detailed pics if poss matey, do they include, centres, also widths

[neil_jdmr]

Here you go mate, posted on here as had these pics in my photobucket and was having a pain attaching them to an email, will send you a mail too to let you know.
 
Front

 
Front (worst one due to laquer peel)

 
Rear

 
Rear (dint in bottom left corner)

 
When they were on the car


 
They will include all centre\'s and the original Volk wheel spanner (if i can still find it lol) but obviously without tyres.
Width\'s are 17x8.5 front and 17x9.5 rears

[DR SCHNITZEL]

ok cheers for that mate i love these wheels, just a shame the rims are a bit ropey. ill get back to you on these cheers

[DR SCHNITZEL]

Alright mate just examined these closely, i think 180 is a bit steep since they sell with tyres for 200 on ebay and they aint in great nick, even the centres. will you take less for em, id only pay about 100 for em plus post about 7 quid a wheel 130 all in?

[SiH]

Neil - I\'ll happily give you what you want for those
Drop me an email at simon (underscore) r (underscore) hill (at) hotmail (dot) com if you want and I\'ll take them off your hands if Dr Schnitzel doesn\'t

[neil_jdmr]

At work atm guys so cannot access my personal mail so ill mail you tonight and sort something out,
 
Im not gonna take any less as ill just keep them and refurb them myself if that was the case, so unless the doc gets back to me before then they will go to you Simon.

[SiH]

Ah crap Neil, I\'ve just realised they are the wrong lip style to what I wanted them for Mine are the 29 hole ones with the valve further out, so I\'d have to pass Wanted to use them to make up an evil set of MS01s\'s

[neil_jdmr]

No worries Si,
 
Gonna get the tyres off them this weekend as they are bridgestone\'s all round and my fronts are getting down so will swap them over, Doesnt look like they are gonna go so will start prepping them over the next few weeks as i do like them and really deserve a bit of tlc.

[DR SCHNITZEL]

No worries Si,
 
Gonna get the tyres off them this weekend as they are bridgestone\'s all round and my fronts are getting down so will swap them over, Doesnt look like they are gonna go so will start prepping them over the next few weeks as i do like them and really deserve a bit of tlc.

will you do em for 190 posted?

[SiH]

Mr Scnitzel - if you are planning on rebuilding your wheels with those lips rather than just using Neil\'s wheels instead, you\'ll need to check that the bolt pattern is right - at it\'s very basic level, count the bolts and check valve location - then you need to check the PCD of the bolts (diamter of the imaginary circle that would run through the centre of them).

However, if you are planning on using them as a set without swapping anything out, then that\'s not a problem at all!

[neil_jdmr]

Doc, make it a round £200 posted and you have a deal,
 
SiH, Dr schnitzel has the same wheels and is planning on making a mint pair out of two rough/damaged sets i believe so the stud/bolt pattern will be the same

[neil_jdmr]

Doc, make it a round £200 posted and you have a deal,

Providing i can get a delivery service for less than a tenner a wheel that is,