Water Hazard

Started by Wolverine69, August 04, 2009, 06:08:36 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Wolverine69

Hello all.
As my previous posts showed i was having problems with my Rx7 FD3s stalling and not starting during wet weather so i changed all my leads and plugs sprayed all exposed and not exposed electrical connections and this seems to have done the trick, at least i thought until a heavy downpour the other day and low and behold it happened again.
I just happen to have a friend with me who said the carpet felt a bit soggy in the passenger footwell upon inspection the carpet was soaking and the water was all over the cables going into my ecu .
Has anyone had this problem and could you suggest where the water is coming from and would this be the problem for the starting?:3Confused

col_fd3s

have you looked to see if the grommet in the bulkhead is in properly?

may also be the door seals?

ro284

Look here mate, may help,
Apexi PFC Expired Through Water Ingress

Nik da Greek

Heater matrix leaking?

Wolverine69

Thanks for the links guys much appreciated . took out the ecu it was soaked and the chips were startin to fur up just used a contact cleaner and a small brush cleaned up all terminals put back together let it dry overnight popped it back in and bobs your uncle excellent.:3gears-rh

Wolverine69

Thanks mate excellent link followed the steps on trying to revive my apexi ecu and it worked like a charm. This site is well worth the subscription in saved garage costs alone