Interchangeable Items for the FC

[Furb]

1. Skyline radiator (think R32)
2. FD front brake pads
3. FD front brake calipers
4. Skyline Front Brakes
5. MX5 Braided Brake line for clutch hose (slight modification required on bracket, and need to reuse washer as a spacer) £15 !
6. AE86 door mirrors
7. MX5 diffs drop into NA\'s FC
8. MR2 MKII pop-up light glass
9. FD thermostat will fit an FC and there is a Saab one that fits that has a lower opening temp.
10. FD Diff internals will fit an FC TII diff casing and give you an LSD.
11. FD Brake Master cylinder will fit TII and give better braking pressure
12. Rear FD Braided brake line can be used as a clutch line for the TII
13. FD RZ front callipers can take a 32mm front disc so bigger and wider front discs (from anything) can be fitted. Callipers will need a bracket to relocate it. I fitted M5 discs (335 x 30) to my FC using stock FD calipers with a spacer in the middle from Billet Bitz who used to advertise on here. The RZ caliper already has the spacer from mazda. The brakes were fantastic on track
14. Evo IX brembo brakes fit with minor mods on the FC fronts. Apparently you need to drill out the caliper bolt holes a little, and the rotors need machining down a small amount and the centre hole is a little narrow for the FC centre\'s so that needs to be machined out just a little. This will only work on 17" or above wheels, and may require a spacer as the calipers are a little wider.
15. MX3 ashtray is identical to the FC one.
16. Mazda 323 pop-up headlights
 

[Skifledanabit]

FD Brake Master cylinder will fit TII and give better braking pressure
 

How does this actually work? I\'ve got the FD brake master cylinder, I measured it up with the FC one, they dont seem to be anything alike, lines etc in different places, can someone explain how this one works?

[dthebuk]

i was told that the ignition coils in my late s4 fc were the same as those from a beetle, im guessing an old one. Havnt got any confirmation though

[pdtaylor18]

Easy way is to throw the part numbers up in google and see what it brings up.

[TiddlesRX7]

Anyone got the part number for the dual alternator pulley belt?

[L18M]

Anyone got the part number for the dual alternator pulley belt?

i might misunderstood the question but cant you just call up mazda and ask? as its the same  as a normal alt belt.
btw best to change the old belt also as the old belt will have worn a bit and wont be as tight as the new one when u put it on.

[grinder]

its just 2 belts mate - something off a old 1969 mini or summat daft like that

[L18M]

i thought the mini belt was only fan and alt pulley without going round the water pump?

[L18M]

do fd brake disk (front and rear) fit fc? same with brake pads?

[TiddlesRX7]

Disc\'s don\'t fit from FD to FC (different bell dish or something) I think the pads fit in the front but not sure about the rears.

[flatout]

323f head light motors fit a fc

[turbointhebrain]

323f head light motors fit a fc

mm sounds like a plan, must investigate this for my 6 port

[bumpstart]

mx6 window switches = same as FC
( starts a run on mx6 wrecks )

[bumpstart]

b2200 or ford couriier ( around 88 ), also s3 12a rx7 brake booster and master is same as original 85/86 FC non ABS
( OZ ,, dunno if you get POM bravo/courier utes )

[bumpstart]

10A 550 belt from mitsu magna 2.6 goes around water pump and main pulley without tensioner
( ie to save the motor if the alt belt throws and also to prevent squeal /slip when airpump is gone )
its also a dunlop / hoover 38528-403 belt for washing machines
[/quote]