Interesting use for a Rotary Engine !

Started by shaunwil, July 13, 2009, 06:45:07 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Print
Go Down Pages1
User actions

shaunwil

July 13, 2009, 06:45:07 PM
I get MWP every month and this month has a cool engine concept for UAV\'s.

http://cde.cerosmedia.com/1D4a48a9630231f391.cde     (pg61)

Looks brilliant !

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

J_T

#1
July 13, 2009, 06:48:53 PM
Cool heatsink fins on the rotor housing!

shaunwil

#2
July 13, 2009, 07:05:53 PM
Its air cooled and he wants to run it without lubrication with the correct coatings !

Only 3.5kg in total !

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

Ada7

#3
July 13, 2009, 07:35:33 PM
Interesting read and concept :D

Adam
I AM HERCULESIAN
Rex II - The Bridgeport years http://mazdarotaryclub.com/forum/index.php?topic=82902.0

philiwily

#4
July 13, 2009, 09:08:06 PM
Cheers, nice read

logicalChimp

#5
July 14, 2009, 02:22:34 PM
cheers for postin that - excellent article - muy interesting ;)

Rub87

#6
July 19, 2009, 05:04:32 PM
if you look on the site at the projects tab, it seems like it\'s a rotor without cooling passage (unlike the old sachs aircooled engines) so it seems the rotor gets no cooling? also the rotor bearing is not lubricated by premix oil/fuel as in most of these small engines, so this means cool intake charge... but very hot rotor/bearing
Print
Go Up Pages1
User actions