Does this look normal

Started by Carrington, June 03, 2009, 06:34:44 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Carrington

June 03, 2009, 06:34:44 AM
Hi guys,
 
Just rebuilding my engine at the mo and just fitted the oil metering pump on the side of the block. Should there be gap at the top like the one in the photo?
 
Thanks
 
Danny

Prof

#1
June 03, 2009, 07:07:28 AM
Don\'t know if your\'s is an FC or FD, but I have the same gap on my TII (FC) so I am guessing it\'s normal. The seal is made by an oval O ring on the edge of the OMP, so it should be ok.
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex

chris

#2
June 03, 2009, 08:52:30 AM
Quote from: Carrington;612949Hi guys,
 
Just rebuilding my engine at the mo and just fitted the oil metering pump on the side of the block. Should there be gap at the top like the one in the photo?
 
Thanks
 
Danny

perfectly normal, it is a recess in the casting, the seal is much further down the pump
Print
Go Up Pages1
User actions