FC3S wheel style photos

m1tch · May 16, 2009, 10:31:01 PM

Hi guys, I thought I might try and start another possible sticky thread regarding wheel pattern type on the FC3S as it can be quite hard to know what rims you see on other cars are, if everyone can post up photos of their cars with possibly different angles with the make, model and size of the alloys its running, other people can see what they look like on an FC

Thanks guys

Its easier than trying to photoshop wheels on :yes

Nocturnal · May 17, 2009, 12:16:10 PM

What\'s the PCD of FC hubs?

Prof · May 17, 2009, 01:17:24 PM

TII\'s and some later EGI\'s were 5x114.3 offset is 35-40 IRC

Nocturnal · May 17, 2009, 01:28:21 PM

Cool, I\'ll have a look for some wheels then for this thread. For what it\'s worth, 5x114.3 is the same fitment as Nissan S-bodys, Mitsu Starions etc.

m1tch · May 17, 2009, 01:32:24 PM

I was meaning wheel styles eg:

Rota Grid drift 18"

G@NDY · May 17, 2009, 06:31:39 PM

Ive got 16" mazdaspeed MS01\'s on mine

mukumu kurubushi · May 18, 2009, 09:51:46 AM

18" Advan RG

Brett · May 18, 2009, 09:59:18 AM

I\'ve got some MazdaSpeed MS747\'s waiting to go on mine (as soon as I get them refurbed)

grinder · May 18, 2009, 04:32:54 PM

i have 16 inch Enkie ( or summat like that on mine ) ...

errr now i need a pic ....

Moonwrap · May 19, 2009, 03:05:29 AM

Quote from: Brett;608583I\'ve got some MazdaSpeed MS747\'s waiting to go on mine (as soon as I get them refurbed)

I thought you had decided that they were no-go?

Brett · May 19, 2009, 07:16:00 AM

Quote from: grinder;608695i have 16 inch Enkie ( or summat like that on mine ) ...

errr now i need a pic ....

You have a 16" what?!? :rollin

Furb · May 22, 2009, 07:11:46 AM

barracuda velvet
front: 18 x 8,5J offset 25
rear: 18 x 9,5J offset 25

tires:
front: 225/40r18
rear: 255/35r18

L18M · May 27, 2009, 01:35:29 AM

found this on an older thread but closed the thread prior to looking at it.
http://www.tirerack.com/upgrade_garage/WheelSearch.jsp?autoMake=Mazda&autoModel=RX-7+Turbo&autoYear=1990&autoModClar

rx-sx · May 27, 2009, 04:02:45 PM

My FC on buddy club P1\'s - 16" x 7.5" et12, not the final ride height yet and more than likely going to reduce the offset a little further, 5 - 10mm spacers going on once she\'s finished going down;)

pdtaylor18 · June 06, 2009, 08:57:25 PM

Antera 309\'s with:

Rears are 20 offset and 10J with 265x30x18"

Fronts are also 20 offset with 8.5J and 225x35x18"

Mine are wider than standard,especially the rears to fill the wider arches. The Antera range are Italian.

FC3S wheel style photos

mukumu kurubushi