silly question...

Started by stocky, May 14, 2009, 09:38:49 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

stocky

do mazda still sell the vacum houses from the uim and the vacum box?
or is it possible to just replace with a different silcon house?- if so would you just use the hose on its own or have to get them boxy things with arrows (no idea what the technical name for them is) on???
i was removing the uim and i know i broke one by accident but also came across a couple that were fooked so hopefully when there replaced will solve my high idle prob when i eventually get iy back on the road again

gear1275

yes you can just replace them with 4mm silicone hose. i did mine last month. either attach them with a small bit of adhesive or a small 4 inch cable tie, with regards to "them boxy things" they are one way valves and if broken will need replacing. you can get them from mazda, i had the part number somewhere, ill see if i can find it. if youve got the car that far apart then it might be worth replacing the rest of the vacuum hoses, theres a great write-up on robrobinette.com. it goes into lots of detail and is very useful.

gear1275

there you go mate,


Small diameter check valve    HE41-13-995
  Large diameter check valve    N390-13-995A

and gaskets too if you need to replace them,
 
Throttle Body Gasket             N3A1-13-655
  Throttle Body O-Ring            N390-13-W69
  Extension Manifold Gasket    N3A1-13-112
  Air Control Valve Gasket       N3A3-13-996

and the link to robrobinette,

http://www.robrobinette.com/how_to_engine.htm

have fun reading!

stocky

thanks you have been a great help
i may aswell replace the lot as you said
cheers

gear1275

if your feeling brave!! i replaced 54 of mine, which was all apart from the four that are inaccessable without removing the solenoid rack. i couldnt get to the four srews at the back or the solenoid rack to remove it. you have to take it steady with them as they are made of cheese!! also, be careful when changing some of the 6mm lines at the front of the turbo\'s im not sure of thier technical names as they contain restrictor pills and if you replace them with normal silicone hose you wont acieve stock boost!! but apart from them four, it made a huge difference and cured all of my boost issues! shame it didnt prolong the life of the water seals!!
cheers, james