AFR on Apexi

[jetpilot]

Hi guys, i am right in thinking there is a signal wire on an Apexi or wiring loom to wire my gauge in to?

[jackaleks]

http://rx7.voodoobox.net/
 
there\'s an AFR install guide on here. looks like it wires into the stock loom so shuold work with an Apexi

[jetpilot]

Thanks buddy, seems my wiring loom is different colours, maybe cause he is in US and left hand drive. Thanks.

[jackaleks]

http://www.innovatemotorsports.com/resources/1993_1995_Mazda_RX-7.php

this should help!

i\'ve been meaning to do this myself for a while and i printed this off to help.

[jetpilot]

Just tried the suggested wire and it didnt work, but after looking at the diagram and part following advise from the other link and the wire needed is opposite a blue/white wire, 3C is actually at the other end, 2nd in if that makes sense. Maybe is a right/left hand drive thing again. Will go try it now and let you know the results.

[jetpilot]

OK, does seem like its the other way round on mine, the wire i used is opposite a blue white and is a black wire, but a 180 flip from that diagram.

[jackaleks]

hmm, i guess Mazda must spin everything around when going from RHD to LHD!
 
i\'ll have to remember that when i finally get around to wiring mine up