widest legal tires

Started by dthebuk, August 26, 2008, 08:05:43 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

dthebuk

quick qu
 
Was just wondering, what are the widest legal tires you can fit to an fc with no modifications?


cheers


\'91 FC TII - Drifter... Under construction :D
:burnout

dthebuk

#1
i meant to ask about the widest legal wheels....urgh not my day


twas inspired by this thread :D

http://www.mazdarotaryclub.com/forums/showthread.php?t=51604


\'91 FC TII - Drifter... Under construction :D
:burnout

sadgoth

depends on the offset. I\'ve got 17x9 at the back (could easily fit 17x10s) but I\'m running 17x8 at the front but the offset means I need spacers so I have tryes which sit about 6mm proud of the arches
Mark
89 Black FC3S Turbo II
1/2 Bridge port   Microtech LT10s   TII Conv Aluminium Bonnet & Leather seats   Koni Shocks Pi Springs   De-catted 3" exhaust  
GT4088 turbo   Walbro fuel pump   1000cc injectors   custom V-Mount   Blitz Boost Controller (ok so the boost controller is still to fit)

Loud? Hell yes! :D

pdtaylor18

Offset is the crucial bit and also if you have coilovers.  I have been looking extensively at wheels and offsets for my widebodied FC.  You can go to a 25 offset on 17" with a staggered fit, see Furbs setup as thats a good fit and fills the arches nicely.
I have even looked at 10J for my rears and my offsets will most certainly be 25 or lower.
Its the fronts that are the pain as there is not much room from the rim to strut.
Front ideally an 8J with 35 offset
Rears you have loads of room and ideally a 9.5J on a 30-35 offset but 10J will fit with offset to suit.
Wheels do vary and not always what they say they are but it again depends on rolled arches, flush fit or kept within the arches etc.
1990 TII Cab JDM- Lambo Orange- HKS GT3037 turbo,Apexi PFC and datalogit,Greddy FMIC,Trust coilovers,18" Antera 10J 265 rears, 18" 8.5J 235 fronts

Paypal: pdtaylor18@hotmail.com
Email: pdtaylor18@hotmail.com

Pete[SIGPIC][/SIGPIC]

NeilSR

Just noticed this, ive got 18x9 on the front and 18x10 on the back, cant remember offsets so will post them up next time they are off

dthebuk

not the speediest of replies, but it will do :D

thanks


\'91 FC TII - Drifter... Under construction :D
:burnout

NeilSR

Lol, Im bored so decided to go through old threads, lol

dthebuk

haha nice one, still waiting to see your car in action!!


\'91 FC TII - Drifter... Under construction :D
:burnout

Skifledanabit

legally, the wheels and tyres cannot come past the widest part of your bodywork iirc so the widest point of your respective wheels arch is the widest you can have it... just adding onto the latecomers
1989 Gen 2 EGi //www.missbanzai.net
[SIGPIC][/SIGPIC]

dthebuk

i think if you stretch the tyres you can have wider wheels, aslong as the tread is under the arch.

think thats what i originally wrote tyres instead of wheels too :D


\'91 FC TII - Drifter... Under construction :D
:burnout

pdtaylor18

Rears will fit nicely 9.5J with a 25 offset
Fronts will fit a 8.5J with 25-35 offset

No spacers are needed,front tyres will be 225 and rears around 265 but that depends on the profile and diameter.
The above sizes do work and all legal but you can go wider on the rear but offset in all cases is the crucial bit.
Standards are 205-55-16 with a 40 offset so just use the tyre/offset calculator and that will give you an idea of what the different offsets will do.
http://www.rx7club.com/showthread.php?t=698611
1990 TII Cab JDM- Lambo Orange- HKS GT3037 turbo,Apexi PFC and datalogit,Greddy FMIC,Trust coilovers,18" Antera 10J 265 rears, 18" 8.5J 235 fronts

Paypal: pdtaylor18@hotmail.com
Email: pdtaylor18@hotmail.com

Pete[SIGPIC][/SIGPIC]

NeilSR

Was gonna say, Ive got spacers front and rear aswell, lol