My Car

Started by kevint, June 21, 2004, 08:25:04 AM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

kevint

QuoteOriginally posted by BlitzBoy
Cruiser, 253 atw is very good if u consider that the FD is 255,265,280 bhp (depending on model) at the FLYWHEEL standard.
Kevins figures are impressive considering the limited mods he has done.
An early standard FD, should produce 205-210 bhp at the wheels as a bench mark figure

When stock I had 217rwhp (G-Force 2003) and a very erratic boost and power curve, with pfc and boost controller this was a smoother 215rwhp (CPL 2004) at less peak boost, Geff tried to raise boost a little but identified exhaust as bottleneck.

Back box, downpipe and tuning have added 38rwhp (c.45fwhp) which I am well pleased with.  The car feels a lot quicker and smoother.

Currently maxing at 85% injector duty and undecided whether to go for mid-pipe and another tuning session or whether that will just lead me down the slippery slope - uprated fuel, intercooler, intake etc. Will talk to Geff next time I am down at REworx.

Kevin

BlitzBoy

you not tempted to upgrade the secondary injectors and fuel Pump Kevin and put the boost up to 13psi?
I bet your car would make 300 atw with those additinal mods
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

kevint

I\'m not sure, more boost = higher temps, won\'t I also need to look at uprated intercooler?

As I say I\'ll talk to Geff next time I see him as I\'ve always been happy with the work he has done on my car.

Kevin

cruiser

You will definately need to get new better IC if you want to run over 12psi.

mids

Very nice Kevin :cool

your pics inspired me to take a few of my own over the weekend which I should get round to posting sometime.

FDDreamer

Nice! More FD goodness! Look forward to seeing your beasty, mids! :D
Adrian

kevint

spot the difference:

scooby_si

Hmm it\'s rained more recently & you\'ve cut the bush back? http://www.smileycentral.com/?partner=ZSzeb008\' target=\'_blank\'>http://smileys.smileycentral.com/cat/16/16_6_10.gif\' border=0> http://www.smileycentral.com/?partner=ZSzeb008\' target=\'_blank\'>http://smileys.smileycentral.com/cat/26/26_27_1.gif\' border=0>
Oh i suppose you\'ve attacked the wheels with a big knife as well? lol
Si
PS missed the serious bit looks good mate...

Andyp

looks great mate! I always wanted that colour it\'s just lovely :D

cool pics :)
The Beatles were prats.."Money can\'t buy me lovveeee".. utter rubbish. You can buy love here

Buy my car foo! :D

kevint

Close up:

FDDreamer

Perfect Kevin, just perfect. Can\'t beat those rims. Where did you find them? I thought the Spirit Rs all had the gunmetal coloured rims? Learn something new every day! :D
Adrian

kevint

I had them imported from Japan.  The Type-A has gun metal rims, the Type B & C the silver ones.

Kevin

FDDreamer

I see! I think i\'ve only seen pics of the \'A\', although i knew about the other two i wasn\'t aware they wore different shoes!

Thanks for the info, and congrats on getting a set - they must be extremely rare over here...you must be one happy bunny! :cool
Adrian

John Yorke

Nice wheels :D
Time now for more mods...............injectors................fuel pump....................FMIC..................go on you know you want to ..............................its de devil in you..........go on:bandit :bandit :bandit :cool

kevint

QuoteOriginally posted by John Yorke
Nice wheels :D
Time now for more mods...............injectors................fuel pump....................FMIC..................go on you know you want to ..............................its de devil in you..........go on:bandit :bandit :bandit :cool

Very very  tempted John.  It\'s seems that 300 at the wheels is not too far away :) :) :)

Kevin