Gt35r

[jetpilot]

Hi guys. Maybe some guys running the GT35r could give me some feedback on what ar your running on the hot side and hp figures, i know you can get 3 different sizes so curious to see what results your getting? Thanks

[DR SCHNITZEL]

Try the american forum mate they have a dedicated single tub section. Plenty o reading is in order.
 
I was going to go 35r on standard ports was expecting 430 fwhp at 1ish bar but that was a guess looking at the forum averages

[jetpilot]

Thanks buddy. Trouble is the americans like to over exaggerate their figures so trust the guys that are running them over here to be more conservative and realistic.

[DR SCHNITZEL]

yeah. maybe just go for the middle size hotside, 430 is about the ave at just over a bar i think from my readings, i have the to4r with the 84ish hotside, hoping to make about teh same maybe with a slower spool than yours. good tub choice. its what pip recommends you go no bigger than on standard ports

[efiniste]

I went for the biggest hotside, 1.06 an a T3 footprint. Awesome spool up and an easy 400 atfw at just under a bar. Can\'t recommend it enough for fast road and track day driving.

Steve

[DR SCHNITZEL]

I dunno about my to4r with 84 hotside, what do you think comparison will be efiniste

[efiniste]

I\'ve never tried a T04R to be honest but seem to remember it\'s a bigger turbo than the GT35R. With the smaller hotside on the T04R I\'d guess they should be very similar. Are you getting it mapped at Pips? You could always ask him to compare the power curve with mine that he has on file there, I was only in a couple of weeks ago so it\'s a recent one.

[jetpilot]

I went for the biggest hotside, 1.06 an a T3 footprint. Awesome spool up and an easy 400 atfw at just under a bar. Can\'t recommend it enough for fast road and track day driving.

Steve

Do you have any porting on the engine, fuelling mods buddy? Any chance you would have the dyno graph to put up please?

[efiniste]

Just a WGT street port. Running 1680 secondaries, standard primaries and a Walbro pump. I might have an old dyno printout around here somewhere. I\'ll have a look and post it up.

[jetpilot]

Thanks buddy.

[DR SCHNITZEL]

Ahh wont really be comparable mines on standard ports yours is ported. mine prob need a similar port to compare maps