Where is everyone getting their exhausts?

Started by m1tch, January 01, 2009, 10:18:10 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

JayDee

Powergains has withstood a car running up to 1.7 bar so there!!! lol
Quote from: Rzla;570519Well that is your opinion atomic and your experiences and I respect that. However my experiences are completely different and the downpipe has held more than 400 horses for 6 months and it has held the power perfectly.
I know of several other people who have got it built from there running over 400 horses for a few years and never had a problem. And the price was great considering they had to make a custom downpipe. They have a good reputation with other jap car users too.

dthebuk

Quote from: m1tch;570518Hmm see, the problem I have is that I want to keep the stock look, but my current exhaust isn\'t stock :( its a custom 1 piece exhuast with a midbox. The problem will come when I try and fit a cat back which I am guessing would bolt onto just before the midbox I have at the mo, meaning I would have to either cut the midbox out completly or shorten the cat back system I buy :( Looks like I will have to go custom then, I will be doing it in 2 sections, pre-midbox and post midbox, as the current downpipe is for the stock turbo and not the new turbo.

I will need a new downpipe for the new turbo, so its pointless getting a turbo back system that has the old turbos fittings :(

if you wanna keep it stock looking then racing beat is where its at :D


\'91 FC TII - Drifter... Under construction :D
:burnout

pdtaylor18

#17
I have got a complete SSautochrome on the white FC and its been very good so far,noise levels is where I want them.(twin exit) the twin exit alone is about £270 but this will mate up with the single system inc downpipe.  they do not sell the seperate items so I had to buy the single full system and the twin boxes seperately, mated spot on and has now lasted 2 years without fault.  If you can get the downpipe then making one would be easy for an exhaust company.

My orange FC has a twin Racing Beat which believe it or not I picked up for £50!! bargain.
I do have a catback system (powerflow) with 2" bore you can have for £80,got 2 large oval pipe tips and will mate up with standard system but its the basis on which to build the rest from.
1990 TII Cab JDM- Lambo Orange- HKS GT3037 turbo,Apexi PFC and datalogit,Greddy FMIC,Trust coilovers,18" Antera 10J 265 rears, 18" 8.5J 235 fronts

Paypal: pdtaylor18@hotmail.com
Email: pdtaylor18@hotmail.com

Pete[SIGPIC][/SIGPIC]

m1tch

#18
Quote from: pdtaylor18;570654I have got a complete SSautochrome on the white FC and its been very good so far,noise levels is where I want them.(twin exit) the twin exit alone is about £270 but this will mate up with the single system inc downpipe.  they do not sell the seperate items so I had to buy the single full system and the twin boxes seperately, mated spot on and has now lasted 2 years without fault.  If you can get the downpipe then making one would be easy for an exhaust company.

My orange FC has a twin Racing Beat which believe it or not I picked up for £50!! bargain.
I do have a catback system (powerflow) with 2" bore you can have for £80,got 2 large oval pipe tips and will mate up with standard system but its the basis on which to build the rest from.

Ok mate, I will keep that in mine, will have a look around and see what bits I might be able to get lol its difficult as I will need a new downpipe, probably custom made with the new turbo and turbo position

Might go for something like this:

http://cgi.ebay.com/ebaymotors/Mazda-RX7-FC3S-86-92-3-Dual-Exhaust-System-Down-Pipe_W0QQcmdZViewItemQQ_trksidZp1713Q2em153Q2el1262QQcategoryZ33630QQihZ017QQitemZ270292094834QQtcZphoto

It seems like its the extra part of the kit the UK exhaust system is missing, its going to cost about £450 delivered, is that a good price?

L18M

that looks similar to the one i got but mine was single exit...
tho tbh.. (not being racist.. or in this case exhaustist?!?!) they all look the same =p very shiney...
2 doritos on a stick woohoo :rollin

m1tch

lol :D shiny shiny :D lol Im thinking of perhaps getting that kit from the US ebay above, fitting it to my stock turbo, then when the time comes I can just get a custom downpipe to fit onto the rest of the system :) I think that might be cheaper in the long run, plus im sure someone is going to want to have a stock turbo downpipe on here at some point lol

Mazdarotaryparts

Quote from: dthebuk;570402racing beat
http://www.racingbeat.com/FRmazda2.htm

i believe MRP sell racing beat stuff but its not on the internet site so give em call


The Racing Beat Rev TII Exhaust System has now been added to the MRP shop site.  

See here for more details on the product.

http://www.mazdarotaryparts.com/bfc-ex007-rev-t11-exhaust-system-for-1987-to-91-turbo-iib-1386-p.asp
REgards
Clive

Mazdarotaryparts
Racingbeateurope
Racecarbattery
shyauto

We aim to help and assist our customers make the right choices for their Mazda Rotary or MX-5  whether they be standard or modified. If you need further assistance with your inquiry, please do not hesitate to contact us:-
sales@mazdarotaryparts.com T:- 44 (0) 1474 361 800
sales@racingbeateurope.com T:- 44 (0) 1474 777 800
sales@shyauto.com             T:- 44 (0) 1474 771 800

pdtaylor18

Quote from: m1tch;570703Ok mate, I will keep that in mine, will have a look around and see what bits I might be able to get lol its difficult as I will need a new downpipe, probably custom made with the new turbo and turbo position

Might go for something like this:

http://cgi.ebay.com/ebaymotors/Mazda-RX7-FC3S-86-92-3-Dual-Exhaust-System-Down-Pipe_W0QQcmdZViewItemQQ_trksidZp1713Q2em153Q2el1262QQcategoryZ33630QQihZ017QQitemZ270292094834QQtcZphoto

It seems like its the extra part of the kit the UK exhaust system is missing, its going to cost about £450 delivered, is that a good price?


Thats SSautochrome, exactly the same as fitted to my white TII. The names may change but all made by same people.
1990 TII Cab JDM- Lambo Orange- HKS GT3037 turbo,Apexi PFC and datalogit,Greddy FMIC,Trust coilovers,18" Antera 10J 265 rears, 18" 8.5J 235 fronts

Paypal: pdtaylor18@hotmail.com
Email: pdtaylor18@hotmail.com

Pete[SIGPIC][/SIGPIC]

m1tch

Quote from: Mazdarotaryparts;570839The Racing Beat Rev TII Exhaust System has now been added to the MRP shop site.  

See here for more details on the product.

http://www.mazdarotaryparts.com/bfc-ex007-rev-t11-exhaust-system-for-1987-to-91-turbo-iib-1386-p.asp

OOOO :) I will definatly have a think about that :D

pdtaylor18

and thats 60BHP extra with the RB system !!!!  Thats a cost effective way of achieving some good and effective BHP figures, especially mated with a few more mods.
1990 TII Cab JDM- Lambo Orange- HKS GT3037 turbo,Apexi PFC and datalogit,Greddy FMIC,Trust coilovers,18" Antera 10J 265 rears, 18" 8.5J 235 fronts

Paypal: pdtaylor18@hotmail.com
Email: pdtaylor18@hotmail.com

Pete[SIGPIC][/SIGPIC]

RotorHeid

Quote from: pdtaylor18;570859and thats 60BHP extra with the RB system !!!!  Thats a cost effective way of achieving some good and effective BHP figures, especially mated with a few more mods.
it\'s for 8.5 ratio engine,0n 1989-91 engine- approx less than?

m1tch

Quote from: pdtaylor18;570859and thats 60BHP extra with the RB system !!!!  Thats a cost effective way of achieving some good and effective BHP figures, especially mated with a few more mods.

The 60bhp gain is from the stock TII system that has 2 cats blocking 99% of the ehxuast lol im pretty sure most of that power increase is from the loss of the cats :D For some reason the Y piece is less than 3" and I think the 1 I am looking at is 3" throughout, will have to check though :) I know Prof\'s racing beat exhuast sounds fab :D

pdtaylor18

1990 TII Cab JDM- Lambo Orange- HKS GT3037 turbo,Apexi PFC and datalogit,Greddy FMIC,Trust coilovers,18" Antera 10J 265 rears, 18" 8.5J 235 fronts

Paypal: pdtaylor18@hotmail.com
Email: pdtaylor18@hotmail.com

Pete[SIGPIC][/SIGPIC]

TiddlesRX7

Yep that looks like my system too. I know SSautochrome sell them. Mine is made by Motoria. You might be able to get one direct from them.
http://www.motoria.co.kr/
I don\'t need to upgrade my stock turbo to beat your ass!

Get your finger out, get it on the road and start driving it then!!! (B.Martin 25/2/12)