power with this setup?

TTMan · January 21, 2009, 03:46:35 PM

right I got my car dynoed this weekend and would be interested to hear what people would expect to see from my set up....

recently rebuilt & run in engine
mapped to (apparently) 0.8 bar by hayward on pfc
twin apexi intakes
high flow down pipe
full straight through system

think thats all....

BlitzBoy · January 21, 2009, 03:48:22 PM

if its a standard port I reckon 270 at the wheels

Timmy · January 21, 2009, 04:44:49 PM

320bhp atf ish.

D2BBA · January 21, 2009, 04:48:22 PM

Yup, bout 315 at the fly with 0.8 bar

Chris

Bobbit · January 21, 2009, 05:00:42 PM

twelfty!
lol
recon around the 300 mark

TTMan · January 21, 2009, 07:24:42 PM

oh yeah forgot to mention standard ports as well..... came out at 280 atw 340 atf, pretty happy with that on standard twins & ports, bring on more boost

gillard28 · January 22, 2009, 10:25:26 PM

265 at the wheels at the max

TTMan · January 23, 2009, 09:07:23 AM

why you say that? i got 280....

D2BBA · January 23, 2009, 11:56:24 AM

Bloomin heck thats a good figure bud, who mapped her and is it still at 0.8 bar?

Chris

TTMan · January 23, 2009, 02:02:13 PM

awesome

hayward mapped and rebuilt it, still at 0.8 bar since i only got this done last weekend and need to wait for payday for any subsequent mapping. could i run 1 bar on this setup with no probs? theoretically anyway?

will scan in the graph later if i remember :driving

Timmy · January 23, 2009, 02:05:10 PM

There\'s a good possibility you will max out the injectors.

TTMan · January 23, 2009, 02:14:09 PM

ok so uprated injectors are a must to run this boost? what is the max boost on standard injectors setup then 0.8? am interested to know how I can make the next step, i had planned intercooler & rad upgrade but maybe this will take priority....

TTMan · January 23, 2009, 08:00:25 PM

i\'ve also got video but its a huuuuge file and you probably dont care enough to justify the upload lol. there was also a 480bhp atw 580 atf supra there, that was fookin loud!

Bobbit · January 23, 2009, 08:53:16 PM

are you still sequential?

Grizzly · January 23, 2009, 09:22:08 PM

280whp is about 328 fwhp give and take an hp either way

edit: 1 bar being around 360 ish with fuel mods & mapping. hit that and over happy days

power with this setup?

gillard28