Sell The Border Racing Track Toy?

Started by Freddy, January 08, 2009, 12:06:19 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Freddy

Well, have had a period of absence due to other commitments taking up most of my everyday for the next few years so thinking of parting with some of the toys. Having had this for many years now and not made much use of it. It just isnt being used enough to warrant being parked on the drive anylonger. Think it maybe worthy of someone who will utilise it to its full potential. I believe there are very very few proper Jap spec track RX-7\'s out there fully prepared for circuit usage with complete genuine JDM parts fitted from bottom to top!

Although not too sure what the current market would fetch!?

Below are some pictures and spec of my circuit car. Hopefully, it will see more action in the not too distant future. ;)

Any and all comments appreciated! :)

Mazda RX-7 (FD3S KAI)
1995 Type R2



Exterior:

Paint – Brilliant Black
Front Bumper – Border Racing Front Bumper Type II
Front Fenders – Border Racing GT Spec Vented & Wide Arched.
Side Skirts – Border Racing Type II
Rear Over fenders - Rolled
Rear Wing – Border Racing Type II
Rear Diffuser/Spats – Border Racing Type II
Front Diffuser – Custom Carbon Fiber (Waiting to be fitted.)
Bonnet – Complete Custom Stout Racing Style Bonnet
Light Cover – Border Racing Vented Cover
Wheels – Mazdaspeed MS02 Limited Edition Black Colour (Manufactured by RAYS.)
Lug Nuts – RAYS light weight aluminium finished.


Interior:
 
Bride Bucket seat.
Sabelt 6 Point harness
Personal Suede Race steering wheel
Razo gear knob
Stillway - 0-400 lock out shifter
Custom Carbon Fiber centre console and gauge pod.
Omori Gauges - water temp, oil temp, oil pressure (All mounted on the dash to custom carbon fiber gauge pod.)
Omori Gauges – Boost, , exhaust gas temp, fuel pressure (Mounted on the centre console.)
Centre Console – Fuel Controller (pri & sec), ignition start, fan controller, swirl pot switch, water injection.
Tilton - Brake Bias
HKS  – EVC Boost Controller
Step Up Boost Controller
Billion – Fan Controller
Fuel Pump, Swirl Pot & Battery located in boot.
Border Racing 7 point Race Spec Roll Cage.


Engine:

Ported 13B REW
Modded and ported upper intake manifold
Border Racing Spec GT Single Turbo
HKS GT II wastegate
External screamer pipe
Mocal (Earl’s) Custom twin large oil coolers
Custom intercooler piping
Large Border Racing Spec front mount intercooler
Large Aluminium radiator with electric fans
Air pump removed
K&N Air filter
Cold air feed
Oil catch tank
Power steering tank
Aluminum air separator tank
Silicone water hose
Braided vacuum lines
Pulley kit
Fuel Pressure regulator
FEED front pipe
Border Racing “Burnout” exhaust system
NGK Racing 10.5 Spark plugs
Ignition amplifier
Trust blow off valve


Fuelling:

850cc Primary injectors
1600cc Secondary injectors - KG Parts Secondary Fuel Kit
High Pressure Earl’s fuel lines
Border Racing Twin Fuel Pump system (Located in boot.)
Paxton Lift Pump (Located in boot.)
Border Racing Swirl Pot (Located in boot.)
Fuel cooler (located under chassis)


Drive Line and Handling:
 
Quick Shift Gearbox - WPC Modified
Modified Racing Clutch with Counterweight
Lightened Flywheel
Mazdaspeed Differential
Border Racing power plant frame
Solid Diff mounts
Transmission brace
Solid engine mounts
Ohlins Race coil over adjustable suspension
Adjustable Toe links
Grex Alcon big brake kit
Slit Rotor discs
Brake lines
Tilton Brake Bias
ABS eliminated
Power Steering eliminated
Project MU metallic brake pads
Advan Neo Van F 235’s R 255’s tires (Semi Sticky.)







































BlitzBoy

superb cage! defo track ready!
ps its not a Stillway 0-400 lockout shifter looks like a REA shifter
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Freddy

Blitz, cheers mate. Need to edit above. It came with stillway lock out shifter which made its way to the Two Tone RX-7. ;)

Current is a quick shift kit by Border Racing.

BlitzBoy

and how is my favorite white panspeed car?
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Freddy

I havent seen it in 7 months. Last time I checked, was looking good. ;)

gsb876

You selling the two tone one Freddy ? :Giggle
"Every generation has the chance to change the world"

Mills & Bains guest author :Giggle

Ed_RX7

freddy mark from fduk has been trying to call you can you call him please!!!!
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

Freddy

Hi Ed, Can you ask him to PM me on FDUK please mate. Havent had any calls. :confused:

Gurj, Two Tone is going nowhere. It is in my opinion the best FD out there! :Giggle

Ed_RX7

sorry mate its not you its jitesh....my bad!
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

gsb876

Quote from: Freddy;572407Hi Ed, Can you ask him to PM me on FDUK please mate. Havent had any calls. :confused:

Gurj, Two Tone is going nowhere. It is in my opinion the best FD out there! :Giggle

Nah its rubbish sell it :Laugh:Laugh:Laugh
"Every generation has the chance to change the world"

Mills & Bains guest author :Giggle

MaLicE

oooo that looks lovely :) wanna sell me the bucket seat?? lol i neeeeeeed a bride seat!!

Jit

Quote from: Ed_RX7;572414sorry mate its not you its jitesh....my bad!
i PMd him back on fduk dude...

back on topic - fantastic car....perfect track spec and If it did become for sale, it would IMO be the best and most sorted FD on the market by a mile

lockwood77

I\'ve spoken to Freddy about the car and I am extremely tempted... I would just say to those weighing up a suggested price, it isn\'t mapped for UK fuel or registered in this country, so you need to factor in a PFC (or your ECU of choice) and mapping. Also, it would be way too loud for any track in this country (on trackdays anyway), so there is a bit of work there.

Not trying to dis the car, it\'s lovely! :D

Freddy, did you get my last PM re: gearbox etc.?

batman

REAL MEN PLAY WITH TWINS     :Laugh

Freddy

Ian - just saw your PM now, will reply. :)

Tis true, the car is amazing top to bottom.

Most RX-7 owners here have had to remap their car at some point. There were only 125 UK Spec RX-7\'s the rest of the thousands are all imports.

Registration is a simple £150 affair with the DVLA and noise wise, the exhaust system is loud and sounds gorgeous. Anyone in the know will say just how much a Border Racing Exhaust system is worth, for track usage it would require a quieter exhaust but I\'m sure there\'ll be many up for an exchange. :)

Gurj - think the Two Tone will probably never be up for sale. However, you can never say never. Atleast for the next 5 years I know its going to live in the garage!

Also, for everyone that has contacted me. I am not planning on breaking the car! I know its worth a lot of money in parts but something I will not do. The car is one of better prepared track spec RX-7\'s in the country and would not make sense to break.