Skiddy car symbol 4WS/ASC light came on

[gandyRX]

hello, was driving along as normal wasnt booting it, everything was being normal then the orange/yellow light came on in the bottom left of the dash, its got a car skidding symbol on it with the letters 4WD/ASC, i think there the letters on it but i cant think why it would come on, i havnt got abs or traction controll so why would it come on? oh yeah its a 94 gen 3 fd3s, i checked the fluid levels and they all seemed fine, i cant find a reason why it would of come on, once i started the car up to come back home it never came up again :xconfused
 
any help guys, cheers andy

[clive]

Here you go, these are all the symbols that a U/K car has,

[RobbieRX-7]

ABS warning light is missing off that list. This is what kicked in

[AMH]

Yep it\'s the ABS warning.

Below 6 degrees C I get this all the time in my RX-8 before the tyres have warmed up. I only have to dab the throttle or take a corner at normal speed.

So I\'m not surprised you\'re getting in in an RX-7 as you guys have loads more power. Shows you\'re driving it properly! :Giggle

[RobbieRX-7]

Below 6 degrees C I get this all the time in my RX-8 before the tyres have warmed up. I only have to dab the throttle or take a corner at normal speed.

So I\'m not surprised you\'re getting in in an RX-7 as you guys have loads more power. Shows you\'re driving it properly! :Giggle

I *think* the 8 has traction control though, the 7 does not. The yellow ABS light on a 7 should only light up if it\'s faulty. I dont think it even lights up when it\'s kicking in. Mine lights up now and then. I think there is an intermittent fault with the solenoids.

[gandyRX]

i dont have traction controll or abs, its a jap import and it came on whilst i was driving along in a straight line doing 40mph not accelerating or slowing down, sorry i should of put that in my first post

[RobbieRX-7]

So your ABS has been removed? They all came with it as standard.

[AMH]

It would be a bit strange to have a warning light for something that\'s not fitted to the car - unless as Robbie says it\'s been removed?

[Timmy]

If the abs had been removed wouldn\'t the light be on all the time? or off all the time because you\'d normaly remove the bulb.
It\'s something abs related anyway.

[DR SCHNITZEL]

mine is on all the time and now
abs wont work. i think/hope its because a fuse has gone. this has happened before

[Aceman]

Doesn\'t the power FC use the ABS light as a warning indicator sometimes??

I\'m sure if that light flashes, the PFC is warning over knock levels for example.

[trotter]

Doesn\'t the power FC use the ABS light as a warning indicator sometimes??

I\'m sure if that light flashes, the PFC is warning over knock levels for example.

I thought it was only the HEAT light that the PFC uses??

[nikp]

I thought it was only the HEAT light that the PFC uses??

Yup, Power FC uses the HEAT light for all warnings. It\'s the frequency of the flashes, etc as to what the problem is. Most people end up seeing quick flashes though, which means knock.

[Aceman]

Ok cool..

I just remember one light flashed - but haven\'t seen it since the car was setup and mapped properly so forgot which light!!!  

[gandyRX]

sorry guys my mistake i do have abs just went and double checked lol :o:o:o ive checked the fluid levels and everything looks ok, nothing came up on the apexi controler when the light came on, the knock was fine didnt even go above 24 the whole journey and the temperature didnt go above 82 on any of the guages? could possibly be a sensor on the brake pads saying there low?