Anyone got Master Power Turbo\'s?

Started by leeroy_25, December 12, 2008, 07:23:52 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

leeroy_25

I have been toying what turbo to get for a while now when I go single.. I am also building an RB30 engine that will be single turbo.. One name that has been thrown up is Master Power. I have heard mixed things but generally good from people who have actually used them! Mostly the common answer is just get a garrett as that\'s what people know. I would like to know if anyone has first hand experience with a master power unit or maybe a friend with one on something else and what the thoughts are and how they perform.

Thank you
Lee

Timmy

http://uk.youtube.com/watch?v=R27UMoBtuOg

They\'re cheap.
My advise only buy turbos from Garrett, Borg warner, IHI and MHI.

DMDRIFTING

Thats crazy, i\'ve never seen a turbo act like that before, something seriously wrong with the Bearings :eek

skybusr34

i had one of there turbos and oil seals lasted about 3000 miles and was only running it at 0.9 bar so wasnt over worked
if i had 8 hour to cut down a tree. i`d spend 6 sharpening the axe

DMDRIFTING

Experience denotes then, that these turbos are not too great!

Lee have you spoken with Ed?


After Christmas and a rebuild, i will be purchasing a turbo through him, he source\'s them brand new, he also has a lot of information with regards to turbos etc?

Ed_RX7

Strange...I have never had any problems with any i have supplied.....Lets hope you all had genuine Masterpower turbos....and not the chinese rip offs that were flying about........Also as Masterpower only do turbos and not kits. People get their own ancillaries....( oil feed lines etc ) one of the most common problems is when people get lines off ebay for example that are labeled as being suitable for t4/t3 turbos but fail to understand that certain turbos need a certain amount of oil flow......many of these oil line kits are manufactured for BB turbos and the hole is the oil fitting is small ( as bb\'s are oil and water cooled)....but putting this on an oil cooled turbo will evetually knacker the turbo and bearings due to oil starvation as it needs to be much bigger!!!!
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

leeroy_25

I presume you meant this Ed!!!?
Yes a little while back now.. That\'s one person that got me thinking about these units in the first place.. hence was interested to see how many people running them and what stories they had to tell.. I hav also heard on other forums that there was some chinese rip off\'s going about a while ago.

chrisJDM

i think its prob best to stick with the big names garrett, hks, greddy etc

cant go wrong with a t04

all depends what power you are looknig for and what supporting mods you have

Ed_RX7

Well a few people on here have had and still have these turbos..and  have had no problems at all...me included...but of course...the choice is yours.....
 
Also be aware that even if you buy big names you may still have problems.......I know gt42\'s that have given up the ghost after a few miles....so big name turbos dont gaurantee anything....its all about the warranty that is in place and ensuring you are supplied from a goood source.
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

BlitzBoy

I think we shouldnt get MasterPower and XSPower products confused, its XSpower products that have the bad rep
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

skybusr34

Quote from: BlitzBoy;565494I think we shouldnt get MasterPower and XSPower products confused, its XSpower products that have the bad rep


oh **** sorry peeps my bad!!! mine had xspower turbo and intercooler not powermaster

sorry for bad mouthing the tubs ed :wiggle
if i had 8 hour to cut down a tree. i`d spend 6 sharpening the axe

Ed_RX7

no offense taken bud.....!
 
i\'m not worried......and if anyone has had problems with theirs...then they should voice their own experiences on here...thats what this forum is all about.
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of