Will This Be Ok To Use On My FC?

Started by Retro_Boy_G, October 28, 2008, 09:47:43 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Retro_Boy_G

One of my tyres burst somehow on Thursday night and i need to take it down to get a new one or repaired. I\'m looking to buy some axle stands and trolley jack so i can take the wheel off the car and also so i can paint the callipers. I\'m just wondering if this kit would be safe enough for me to use? I\'m not really sure on the weight of the car to be honest.. This kit takes up to 2 tonne. I would imagine i would never need to leave it on the axle stand for anymore than 24hrs to let the paint dry..  

Any help would be appreciated. :)

http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_241361_langId_-1_categoryId_165727

BlitzBoy

oh yes that be fine, your car weighs much less then 1.5 tonnes
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark


BlitzBoy

yep just makes sure you jack the car up on the proper jacking points of the car
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Prof

RAC were doing a kit like the Halfords one for about the money you\'d pay for the 2 Argos items.
 
Could also look at Screwfix - they sometimes have offers on.
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex


Retro_Boy_G

Could you tell me where about this would be?  :confused:

Retro_Boy_G

I need them tonight.. I\'m off tomorrow and me and my brother are taking the tyre in tomorrow morning. I\'ve also got a new arcade machine coming and i need to be able to move the car out the garage to fit it in.. You will all be super jealous when you see the new machine!.. :)

BlitzBoy

oooh what arcade machine you getting, is it old skool?
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Retro_Boy_G

No No it\'s not old skool at all.. I\'m more into my Jap Candy Cabs and not the ones you would be used to seeing in the arcade as a kid.. I\'ve already got a few machines.. to be honest i\'m only holding this for a mate while he builds his new garage.. all i can say is it is a twin driver cab and sounds a bit like Enishal Dee Free.. :)

Prof

Quote from: Retro_Boy_G;548666Could you tell me where about this would be? :confused:

http://www.hotukdeals.com/forums/showthread.php?p=156185
 
Just looked at the date on that - very old :( - might be worth a check though - they\'ve been on offer more than once - Mitch on here got one more recently
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex


BlitzBoy

ahhh you got to take pics when you get it the arcade machine sounds cool
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Retro_Boy_G

Sorry Prof i was referring to the "yep just makes sure you jack the car up on the proper jacking points of the car" part.. haha.. The local Argos have both items in stock so i\'ll nip out of work at some point and go pick them up.. :)

Blitz - I will take loads of pics dude! :)

Prof

Quote from: Retro_Boy_G;548676Sorry Prof i was referring to the "yep just makes sure you jack the car up on the proper jacking points of the car" part.. haha.. The local Argos have both items in stock so i\'ll nip out of work at some point and go pick them up.. :)
 
Blitz - I will take loads of pics dude! :)

No worries - they do the RAC kit in Arguuuus too !  :
 
http://www.argos.co.uk/webapp/wcs/stores/servlet/ProductDisplay?storeId=10001&catalogId=1500001151&productId=1500262927&langId=-1&engine=froogle&keyword=RAC+10+Piece+Garage+Kit
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex


BlitzBoy

the jacking points are quite easy to spot, normally there is a small indentation where the scissor jack would go or download the service manual as it has diagrams where they are
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Retro_Boy_G

Thanks guys!

Prof - That kit would have been sooo perfect as well! No Argos anywhere near me has it as well.. :( booooo!