Main table of 1/4 mile times and mph\'s for European rotors!

Started by Glenn Butcher, January 26, 2004, 01:08:32 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

silverrexman

Quote from: shaunwil;517403:Giggle

Would a 9sec car be capable of doing that ???

Shaun

Depends on the level of grip,i would say a tubbed car with around 800whp would get interesting.As you can see with the level of grip chris gets he is able to get the front wheels off the ground,as that car gets more and more powerful(somewhere near the power level i have:Giggle) they will eventually need a bar.Unfortunately as my car doesnt hook up yet the only bar i require serves drinks-.......one day though!:Thumbsup!

Jürg Hensdiek

Quote from: silverrexman;517183Right !!now i have recovered from my Elton John moment,i am back to give you corksuckers some more abuse,and yes i have spelt that right-this quote from our german friend jurg has had me chuckling for days.Imagine this said in a deep german accent QUOTE-"Colum and i were looking for some corks!".Now i know what jurg meant,as he didnt seem to like the manhug i gave him,but man i think that phrase just about somes up the laughs we have.
Well done to chris,are you going to USC?dont think mine will ready the extra 200bhp we are aiming for + the addition of the new sequential gearbox and air suspension is going to take time.Even RS5 will be a rush,fingers crossed though.:evillaugh

Oh, it wasn\'t the teddy bear hug that put me off....was the very unpleasant limp wristed handshake i recieved! I\'ve shook firmer warm fish yoghurts!
 
J

silverrexman

Quote from: Jürg Hensdiek;517428Oh, it wasn\'t the teddy bear hug that put me off....was the very unpleasant limp wristed handshake i recieved! I\'ve shook firmer warm fish yoghurts!
 
J

I will make sure i am nice and hard for you next time jurg:rollin

BlitzBoy

Ok Gay boys im ready rumble this weekend, Reworx just finished my very low boost numbers and I got some very nice numbers ;)

Where for art though Silversnail
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

AshRX

here we go again..... lol

Clutch maybe done in time now Mark

BlitzBoy

cool , that makes two people faster then the Snail :rollin
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

AshRX


DRAGON

Quote from: BlitzBoy;522154Ok Gay boys im ready rumble this weekend, Reworx just finished my very low boost numbers and I got some very nice numbers ;)

Where for art though Silversnail


I love it!!! The low boost excuses have already started!!! What are your weak numbers?
The Snail wont be there, we get more interest from the artwork of building the cars, running them just gets them dirty!

AshRX

No way - i was hoping to see Steve there in the inter club challenge

BlitzBoy

Quote from: DRAGON;522161I love it!!! The low boost excuses have already started!!! What are your weak numbers?
The Snail wont be there, we get more interest from the artwork of building the cars, running them just gets them dirty!


No way Ross how can the Snail begrudge us his presence this weekend no fair !!!:cheers

Did he get man raped abroad ?

my weak numbers are 390 at the wheels at 10 psi :p
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

sadgoth

well I\'ll be there, I\'ll take over from silversnail as the slowest of the slow! ;)
Mark
89 Black FC3S Turbo II
1/2 Bridge port   Microtech LT10s   TII Conv Aluminium Bonnet & Leather seats   Koni Shocks Pi Springs   De-catted 3" exhaust  
GT4088 turbo   Walbro fuel pump   1000cc injectors   custom V-Mount   Blitz Boost Controller (ok so the boost controller is still to fit)

Loud? Hell yes! :D

silverrexman

Quote from: BlitzBoy;522163No way Ross how can the Snail begrudge us his presence this weekend no fair !!!:cheers

Did he get man raped abroad ?

my weak numbers are 390 at the wheels at 10 psi :p

Ha,ha,my car can make those numbers without an engine in it.Yep unfortunately i wont be able to make the weekend,it will give you a chance to dial your car in mark,i mean i wouldnt want to embaress you to much.looks like japshow finale for the "grudge match".Good luck for the weekend to you and everyone that races:Thumbsup!

BlitzBoy

Ok Jap show finale it is then :D
Should have some skinnies by then
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

silverrexman

Quote from: BlitzBoy;522284Ok Jap show finale it is then :D
Should have some skinnies by then

Get them tyres asap,you wouldnt want this to happen:2eek
http://www.rx7club.com/showthread.php?t=775736

BlitzBoy

yeah saw that, been running with my tire combo for the last two years never had tracking problems like that guy, I suppose my tyres being treaded ET Streets probably helps.
But yes need skinnies for less rolling resistance
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark