finnished my v-mount. opinions please.

gmogle · June 20, 2008, 06:08:14 PM

Superb work there !!!!!

Hmm, like most other people I\'m tempted to have a go now !!!!

gmogle · June 20, 2008, 11:45:55 PM

Just noticed you are in Norfolk, me also. Be good to meet and have a butchers at the car at some point.

pigeon · June 23, 2008, 06:28:56 PM

Quote from: Bobbit;510525Thats great work bud. You\'ve made this look quite simple (famous last words). And cable ties FTW!
The ducting should be an easy job, but the adjustable dividing plate has me intrigued, how would you control that? And would it affect air flow under normal driving conditions, i\'m guessing that if the angle is wrong then it would sent the air to just one of the two (obviously in traffic this would be perfect for heat soak) and would cause problems. Or am i barking up the wrong tree here??

Cheers buddy. I have a rough idea as to what im going to do with the dividing plate. Once I have time to experiment and play around with some things, I will post up pics and results.

Quote from: RobbieRX-7;510544Looks real good mate. Im still trying to do mine...well i aint even started yet but ya\'know what i mean :Giggle Can i just ask a few questions...

1. What intercooler is that?
2. Have you managed to fit the undertray?
3. Any more pics of the water hoses?

Hi Robbie. Well the intercooler is originally a front mount for an rx7 but with the hot side end tank cut, angled and welded it fits a treat. Cost Â£200 form ebay. As you can see though there is little room for intakes and I had to modify my trust ones to get them to fit. I havenâ€™t managed to fit the undertray and I very much doubt the stock one would fit. If I feel necessary I might try to fabricate one.Give me a few days and I will get some pics of the water hoses. All I needed was X2 off the longest out of the stock ones. HTH and anymore questions fire away.

Quote from: RobMatthews;510608For futur reference the wiring for the rads goes up the loom on the offside,all except the ground wire its a simple job just to undo the tape on the loom pull the cables out and you should have enough length on them then to not have to extend them except the ground wire(although you can pick that up off any metal point) then just tape the loom back up and place back in position.hth rob

To be honest mate I didnâ€™t ever think to try that.lol. nice tip for future though. Cheers.

Quote from: gmogle;510741Just noticed you are in Norfolk, me also. Be good to meet and have a butchers at the car at some point.

Hi mate. yeah sure, always good to meet follow rx drivers. I might even be in

Adam

marco · June 23, 2008, 06:55:52 PM

dont suppose you would knock up some rad brackets in return for a few notes would you?

ssn11 · June 23, 2008, 09:59:29 PM

Quote from: marco;511285dont suppose you would knock up some rad brackets in return for a few notes would you?

when the next time you are in faslane marco??? as can have look at mine as jsut finished it

Adam how did you get around the lower water pipe mine is very low and now has rub marks on the pipe needs replacing allready

sean

pigeon · June 25, 2008, 05:23:27 PM

Quote from: marco;511285dont suppose you would knock up some rad brackets in return for a few notes would you?

i could but the only thing is unless you see exactly how i have set it up your not going to know for sure if its what you are after. im pleased with it but thats not going to say you would be. there are also a couple of niggles i need to sort.

Quote from: ssn11;511375when the next time you are in faslane marco??? as can have look at mine as jsut finished it

Adam how did you get around the lower water pipe mine is very low and now has rub marks on the pipe needs replacing allready

sean

got the same problem at the mo mate. im waiting on a koyo rad. once that arives i will be able to cut and re-angle the lower water outlet so it doesnt point down wards. for now im avoiding speed bumps.

Adam

RobbieRX-7 · June 29, 2008, 03:39:33 PM

I finally got round to starting my V mount today after months & months of putting it off. I got the rad mounted up and so far i\'ve not needed to do any ali welding. For the intercooler, im going to get it from radtec. http://www.radtec.co.uk/index.php They are only a 20 min drive from my house. As far as i know, dragon and WGT use them for their V mount setups. Im also going to get an IC that goes 3/4 of the length of the rad to leave room for my air filters to sit in the nose of the car similar to the first pic. Then im going to make a heat shield for the air filters, then another heat shield divider plate that sits between the IC & rad. I might even make it adjustable, i\'ve not made my mind up yet! I managed to untape the rad fan wires far enough to reach the fans without chopping them up which im pleased with in the second pic.

gmogle · June 29, 2008, 09:32:30 PM

Nice progress there Robbie, how much is just the i/c on its own ?

Pigeon, how has the car been since doing the v-mount ? Got any figures for intake temps etc ?

pigeon · June 30, 2008, 12:45:01 PM

nice work robbie, looking good so far. im waiting on my koyo at the mo. once i have got that in and done my ducting i will post up some more pics.

gmogle, i dont have a intake temp guage so i carnt tell you exactly what my temps are. i can tell you though that if i have a spell of WOT action, quickly pull over pop the bonnet the intake pipe is stone cold and the uim is pretty damn cool to. i have a temperature gun which i could use to check the surface temperature of the uim if you like?

Adam

chrisJDM · June 30, 2008, 01:19:27 PM

looks awesome great work, i was thinking of having a go at this myself one day

karl_tate · June 30, 2008, 05:30:05 PM

what happens with air con etc etc

gmogle · June 30, 2008, 06:10:37 PM

If you have a Power FC commander mate you can display it on there.

Stone cold you say......hmmm now that is interesting. I could fry something on mine after a run lol.

pigeon · June 30, 2008, 07:04:51 PM

Quote from: sweetiewells;513139looks awesome great work, i was thinking of having a go at this myself one day

go for it mate. it is well worth the time and effort!

Quote from: karl_tate;513208what happens with air con etc etc

my air con didnt work anyway so i ditched it. the battery i obviously had to relcoate to the boot and thats about it.

Quote from: gmogle;513220If you have a Power FC commander mate you can display it on there.

Stone cold you say......hmmm now that is interesting. I could fry something on mine after a run lol.

nope i dont have my power fc yet, it is however on the shopping list along with quite a few other bits

i live in watton buddy so not to far away form norwich. if you fancy a drive out my way your more than welcome to have a look. like i say though after a good spin if i quickly stop and have a feel the intake pipe is stone cold and the uim is pretty damn cool to. and i still havent got around to doing my ducting. either that or if you give me your number i could give you a shout next time im in norwich.

Adam