Turbo II in an n/a shell??

Started by James H, June 12, 2008, 12:51:52 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

dthebuk

all UK turbo cars were series 5 so they all have powerful engines :D


\'91 FC TII - Drifter... Under construction :D
:burnout

James H


pdtaylor18

James if this is the way you are going then just buy a 1989 S5 or later scrap car with a good engine and swop everything over that you need.  Jobs done.
1990 TII Cab JDM- Lambo Orange- HKS GT3037 turbo,Apexi PFC and datalogit,Greddy FMIC,Trust coilovers,18" Antera 10J 265 rears, 18" 8.5J 235 fronts

Paypal: pdtaylor18@hotmail.com
Email: pdtaylor18@hotmail.com

Pete[SIGPIC][/SIGPIC]

dthebuk

all uk N/A\'s were series 4 which means 146bhp @ standard. Regardless of the year


\'91 FC TII - Drifter... Under construction :D
:burnout

pdtaylor18

Yep, I was purely stating the differences between the TII engines only.  Quite a few people have done this in the USA so if you log onto the Rx7club.com site there is a lot of info on there for this swop.
1990 TII Cab JDM- Lambo Orange- HKS GT3037 turbo,Apexi PFC and datalogit,Greddy FMIC,Trust coilovers,18" Antera 10J 265 rears, 18" 8.5J 235 fronts

Paypal: pdtaylor18@hotmail.com
Email: pdtaylor18@hotmail.com

Pete[SIGPIC][/SIGPIC]

James H

Right at last have had a good chat with an expert & we have decided to put an RX 8 engine in her, so lets see where this takes me lol

pdtaylor18

been done before, plenty of threads on that one but the cost is gonna be high !!
1990 TII Cab JDM- Lambo Orange- HKS GT3037 turbo,Apexi PFC and datalogit,Greddy FMIC,Trust coilovers,18" Antera 10J 265 rears, 18" 8.5J 235 fronts

Paypal: pdtaylor18@hotmail.com
Email: pdtaylor18@hotmail.com

Pete[SIGPIC][/SIGPIC]

pdtaylor18

has anyone supercharged an EGI engine? must be an add on kit you can buy, imagine with the rigt charger you could get some pretty good results, temps should be lower as well, what with no turbo.  Not sure what the drain on the engine is though and you might have to lose a few things to make it fit.
1990 TII Cab JDM- Lambo Orange- HKS GT3037 turbo,Apexi PFC and datalogit,Greddy FMIC,Trust coilovers,18" Antera 10J 265 rears, 18" 8.5J 235 fronts

Paypal: pdtaylor18@hotmail.com
Email: pdtaylor18@hotmail.com

Pete[SIGPIC][/SIGPIC]

dthebuk

i doubt theres a kit, there used to be a turbo kit but apparently this is no more.


\'91 FC TII - Drifter... Under construction :D
:burnout

James H

Yer looking foreward to the swap & end result will be interesting.... cost wise is only a little more than it wa to get my egi rebuilt so well worth it ;)

BlitzBoy

cool 2nd gen with rx8 engine looking forward to the results, should be as quick as a stock Turbo II
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

James H

Yer me too should be done within a couple of weeks :). Should be quick even thou i am unaware of the FC turbos bhp... it will have a induction kit, with a decent cold air feed, free flowing exhaust, running of a Motec M2R & i believe the fc is roughly 100kg lighter than the rx8 so am hoping for bout 245bhp.... what you reakons??

BlitzBoy

yep it should hit that at the flywheel 240bhp about 180bhp at the wheels, be much quicker then an rx8 with it having more power and less weight, TurboII are 200bhp mostly at the fly they have more torque then the RX8 engine, but you will have a much higher rev limit at around 9k or more , should sound real nice
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

dthebuk

wow, so are you sourcing a used engine or building one from scratch?

its sounding like a great idea :D


\'91 FC TII - Drifter... Under construction :D
:burnout

James H

Picking up a 231bhp 06\' rx8 engine & 6 speed gearbox on friday she has done 33k