Drivers Door Won\'t Open??

Started by ings, June 10, 2008, 08:06:30 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

ings

Hi,

I unlocked and tried to open my drivers door earlier, but although it feels and sounds like the outer handle is connected and working, the door just wouldnt budge.

In the end, I had to go inside the car an use th inner handle to release the door.

Is this a common issue, and are there any easy fixes to this.

Many Thanks.

RemarkLima

Easy fix will be a new handle, chances are the lever bit has broke inside the handle so it\'s not pushing the metal rod properly / enough.

But it\'s easy enough to check out, it could just be that it\'s popped off the clip or the lock has popped off the clip. If you pop off the inner door handle cover (just pushed to fit on), then there\'s 2 10mm bolts which hold the handle on. If you take them off (careful not to lose the bolts down into the door!!!) and have a look behind the handle you should be able to spot the problem pretty easily.

GL!!!

Mark
Montego Blue 94 R2 FD3S... Bling not included.

nikp

Give me a shout if you need a hand with anything Josh!

deanflowers

Ive done mine twice, and guess what yesterday had exactly the same problem. :(

Will be stripping mine apart later also.

davehg

I have spare handles if you need any.... only in bristol as well, nikp knows me.
There are performance cars and then there is the RX-7...........

12.3 second 1/4 mile, terminal speed of 122mph (1st ever drag run on a TO4R)

engine built by....... umm me! now powered by a T51 Kai......

Nik da Greek

Mine\'s done this a couple of times, I think it\'s an intermittent fault with the alarms\' central locking mechanism. I guess it\'s a solenoid that doesn\'t always fire or something, but just pressing the fob buttons a couple of times usually sorts it out. Might be worth checking, if you\'ve got an alarm with that sort of gubbins fitted?

nikp

Quote from: davehg;507300I have spare handles if you need any.... only in bristol as well, nikp knows me.

I\'m sure Dave has a full car in spare parts, and that\'s not incuding that spare car sat on his drive!! Lol

davehg

hey its my blue one im breaking not my red one.... cheek :spank
There are performance cars and then there is the RX-7...........

12.3 second 1/4 mile, terminal speed of 122mph (1st ever drag run on a TO4R)

engine built by....... umm me! now powered by a T51 Kai......

RobbieRX-7

Bugger. I was down bristol way today. Could do with 2 front wheel arch liners.Mine were destroyed by a combination of the nurburgring and a too soft spring.

davehg

i have a pair on the car, not sure the condition though
There are performance cars and then there is the RX-7...........

12.3 second 1/4 mile, terminal speed of 122mph (1st ever drag run on a TO4R)

engine built by....... umm me! now powered by a T51 Kai......

ings

Hi,

Thanks for all the advice and the offer of the spare handles. I\'ll be stripping them down tommorrow to see what the score is with them, and hopefully it will be an easy fix. It sounds as though the handle mechanism is working, but possibly has come loose frm te door lock.

And thanks for the offer Nik, I may be seeking advice from you soon ref an auto to manual conversion.

ings

Hi,

Quick update. Tried the drivers door today and it opened. Seemed a bit stuck, but is definatley better than before when it wouldnt go at all. Seems my car has a mind of it\'s own.

nikp

If the handles are ok, but stiff, get them off, and get some lubrication in there asap! Otherwise they will break. They have a habit of getting tough, and then break. Mine were at one point, took \'em off, and lubed \'em up, and they\'re great now.

ings

Cheers, will do. I\'ll take them off and spray  bit of WD40 in there.

RemarkLima

I can second what Nik has just said... Exactly why I had to replace mine! D\'oh!!!
Montego Blue 94 R2 FD3S... Bling not included.