lights wont go down?

[franky]

hey my head lights wont go back down they pop up ok but get stuck up any1 have any ideas whats wrong???

thanks
chris

[Kash_]

check to see if the lights are getting stuck on the sides with the bonnet/ wing

[Hayward North]

try pressing the button for popping them up.
its on the right hand side of the binnicle.

[franky]

not geting stuck they go back down when i winde them manualy and tried the button 2 but still stayed up???

[franky]

any1 have any more ideas?

[sterumble]

use a hammer

[franky]

any1 else really want this sorted

[deanflowers]

if that button is unplugged they go up but not down, if its faulty maybe the same would occur. have you had the dash out or anything?

[weejimmy]

this hapend to me
was the realy on the drivers side under the bonnet.
its got a wee ruber jacket on
 
to try it use the fule pump realy from the other side of the bay. same pins
 
if it is its £8.26 from mazda part no mj14067730

[Abe130]

use a hammer

What a constructive input for your second post lol

[franky]

this hapend to me
was the realy on the drivers side under the bonnet.
its got a wee ruber jacket on
 
to try it use the fule pump realy from the other side of the bay. same pins
 
if it is its £8.26 from mazda part no mj14067730

thanks i\'ll try this tonight

[RedRummy]

I had this... turned out to be my tyres had worn through the wheel arch liniing and had fouled the popup lights electrics...

doh!   simple fix when you know how.... check for worn cabling.

[franky]

had a look at it 2day the cables seem fine but lucky you said about as it was very close to my tyre lol so tied that up. now i dont konw where these relays are can you post me a pic of something?

[weejimmy]

if its a standerd set up.
open bonnet. its on the passanger side inner wing.
theres a bracket with i think 4 (mayby 2) relays on it its one of them i cant rember which one and ive changed my set up since then.
 
i dont have any pics but if you take one i can point out where

[franky]

hey heres a pic of my car what bits do i need to swap around?