What do people have planned this year?

Started by Brett, April 05, 2008, 03:11:35 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Brett

Are you sure you still have a car Mark? :Giggle
Brap Brap Brap Brap

mpk490p

#16
id like to drop a second of my strip time (drag racing guys nothing else!) should def be in 15\'s this year
new wheels (18\'s)
goto a 48 IDA to increrase power near the 180 - 200 mark (have a better flowing rear box, oil cooler and electric fan since last dyno run)
maybe some more porting possibly next year rather than this
drilled and grooved disc upgrade rebuild calipers and try not to brake anything:Thumbs-up

Prof the cabs really coming on now plenty of hard work gone into it, are you going Donnington in May?

Mark

Prof

Mark - I think we\'ve got something on at the same time as Donny - so will miss that one.  Going to Brooklands Meet though - looking forward to that as we seem to have a good few FC\'s coming.
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex


sadgoth

Quote from: BrettAre you sure you still have a car Mark? :Giggle

don\'t you start! :spank

Well Tim was threatening to have the car ready by this weekend! (I won\'t hold my breath)
Mark
89 Black FC3S Turbo II
1/2 Bridge port   Microtech LT10s   TII Conv Aluminium Bonnet & Leather seats   Koni Shocks Pi Springs   De-catted 3" exhaust  
GT4088 turbo   Walbro fuel pump   1000cc injectors   custom V-Mount   Blitz Boost Controller (ok so the boost controller is still to fit)

Loud? Hell yes! :D

Brett

Quote from: sadgothdon\'t you start! :spank

Well Tim was threatening to have the car ready by this weekend! (I won\'t hold my breath)


Best one I\'ve heard all year!!!

Did he say what it would be ready for? :confused:

You must be fairly excited at the prospect of getting it back?
Brap Brap Brap Brap

pdtaylor18

Quote from: RotorHeidMoray= lossiemouth or Kinloss?


it will be Lossie, lovely area and social partying to the wee small hours !!
Work hard,:D  play hard.
1990 TII Cab JDM- Lambo Orange- HKS GT3037 turbo,Apexi PFC and datalogit,Greddy FMIC,Trust coilovers,18" Antera 10J 265 rears, 18" 8.5J 235 fronts

Paypal: pdtaylor18@hotmail.com
Email: pdtaylor18@hotmail.com

Pete[SIGPIC][/SIGPIC]

RotorHeid

Quote from: pdtaylor18it will be Lossie, lovely area and social partying to the wee small hours !!
Work hard,:D  play hard.
That\'s lossie and  "FYI"   Scottish Sprint championship\'ll held at the camp in July.
 Pity that mine\'s FC13Bpp,might not take part of this time and maybe in Oct!
If you\'re at the camp,  welcome to pop-in and watch.:)

BlitzBoy

Quote from: BrettBest one I\'ve heard all year!!!

Did he say what it would be ready for? :confused:

You must be fairly excited at the prospect of getting it back?

Hahaha Mark is still dreamin, if he has his imaginary car for Saturday I will buy him a pint :D
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

sadgoth

Quote from: BlitzBoyHahaha Mark is still dreamin, if he has his imaginary car for Saturday I will buy him a pint :D

Well now that is almost worth going and buying a real FC for! In all seriousness, Matt honestly thinks he has a good chance of getting it ready! I\'ve got an MOT booked so... never know :3gears-lh
Mark
89 Black FC3S Turbo II
1/2 Bridge port   Microtech LT10s   TII Conv Aluminium Bonnet & Leather seats   Koni Shocks Pi Springs   De-catted 3" exhaust  
GT4088 turbo   Walbro fuel pump   1000cc injectors   custom V-Mount   Blitz Boost Controller (ok so the boost controller is still to fit)

Loud? Hell yes! :D

Brett

Make sure have spare wipers, bulbs etc handy - would be a crime to fail the MOT after all this time!!!
Brap Brap Brap Brap

sadgoth

Quote from: BrettMake sure have spare wipers, bulbs etc handy - would be a crime to fail the MOT after all this time!!!

more concerned about the tyres tbh, I seem to remember they were getting a little on the worn side (just on the legal side of dodgy if memory serves)
Mark
89 Black FC3S Turbo II
1/2 Bridge port   Microtech LT10s   TII Conv Aluminium Bonnet & Leather seats   Koni Shocks Pi Springs   De-catted 3" exhaust  
GT4088 turbo   Walbro fuel pump   1000cc injectors   custom V-Mount   Blitz Boost Controller (ok so the boost controller is still to fit)

Loud? Hell yes! :D

Brett

Maybe Tim or Matt will have a spare set of wheels you can borrow for around 4 years..?
Brap Brap Brap Brap

sadgoth

Quote from: BrettMaybe Tim or Matt will have a spare set of wheels you can borrow for around 4 years..?

ha ha now that is funny!
Mark
89 Black FC3S Turbo II
1/2 Bridge port   Microtech LT10s   TII Conv Aluminium Bonnet & Leather seats   Koni Shocks Pi Springs   De-catted 3" exhaust  
GT4088 turbo   Walbro fuel pump   1000cc injectors   custom V-Mount   Blitz Boost Controller (ok so the boost controller is still to fit)

Loud? Hell yes! :D

BenLewisMav

The next step is to decide how I\'m going to fit the T04E Hybrid to the car, either with the stainless manifold I have, then get made some custom oil and water lines, a custom downpipe to fit the altered location, and buy a wastegate; or; get a 10mm spacer plate and bodge an external wastegate into the standard manifold! What you guys reckon?
 
Then its;
-Fit the EGT Gauge boss into the Exhaust
-Do a rough tune to get it driveable/mot-able w/1000cc inj!
-Get it MOTed
-Get it insured and registed as an Import
-Take it up to WGT to get the Microtech mapped
-Set up the Coilovers
-Finish and fit the Carbon vented bonnet
 
Then later this year:
-Buy some 18\'\' Rota GTR or Torques
-Make a GRP/Carbon Fibre Folding Rear Bench
-Widearch and GP Sport kit it
-Respray/Vinyl/Demo Car Stylee

BenLewisMav