Irratic Oil Temp Gauge

Started by C J R, March 16, 2008, 09:44:03 AM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

C J R

Needle on the aftermarket Oil temp gauge (Mugen) \'flicking\' about when driving.
Any idea\'s what might cause this to happen ?
 
Thanks
Chris

Warthog

Check the connection into the engine block mate, under passenger side of engine. The OEM 7 gauge is pants, if you want correct readings then change to say a SPA Duel Oil pressure/temp one. HTH.
I\'M ALWAYS IN THE SH*T IT\'S JUST THE DEPTH THAT MAY VARY.

Project Evil seven.:evillaugh

RE:WORX---13b RE engine, Motec M400 Pro ECU, Os Giken 5 speed internals-Gearbox, HKS T51R KAI turbo, With 575 @ Fly, 487.9 @ Wheels @ 1.3bar 420 ftlbs, on PUMP FUEL Sheel V-Power. BUILT & TUNED BY RE:WORX. More work planned..:InLove

REW, Stock Twins, RE:WORX-- British Record, 389.2 @ Wheels -- 03/09/2005.

SiH

Chances are it\'s a dodgy earth somewhere. Either on the gauge, or, if it\'s an electrical type with a sender, the try earting the sender to a good solid earth point - best way (if the sender doesn\'t have an eart point)  is to put a jubilee clip around the sender, and run a wire from that to the chassis/engine block :) Some senders rely on earthing via the threads to the block, which isn\'t always that great if you installed the sender with PTFE to stop it leaking :)

C J R