help me choose what mods!!!

[hammy]

ok so 95 fd3s, currently
 
engine
straight through kakimoto exhaust
re-amemiya ecu/chip
re-amemiya single induction cone
standard twins
has been rebuilt.
 
right so im looking to up the power without touching the turbos just now. so got quite a few things im looking to get so looking for recommendations/ suggestions on best combo\'s etc. and anything alse i should look into at this stage.....
 
here\'s the list of potentials
apexi power fc
uprated injectors (primary secondary...what cc\'s??)
fuel pump
greddy pulley kit (remove air pump)
v-mount
 
obviously a re-map to go with!
think thats it....
 
cheers in advance of any shared knowledge!
 
hammy

[Fish]

Get the PowerFC first then save up and do the rest in one go.

Fish

[hammy]

im intending on collecting it all then having it all fitted together yeah.


further sugestions anyone?? what injectors?

[Andy_k]

850cc injectors in the primarys will do the job.

[Andy_k]

Oh and a downpipe and decat, if you haven\'t all ready done it.

[hammy]

ok iv had a look around the forums, just trying to gauge the difference between using the different valued injectors etc?
 
decat\'s done.
 
excuse all the questions!!

[Fish]

Keep the stock 550\'s and upgrade the secondaries to 1600\'s.

Fish

[chrisJDM]

Keep the stock 550\'s and upgrade the secondaries to 1600\'s.

Fish

thats what ive done on mine and all good with twins running 1.0bar, i got mine in a kit from rx7store.net

http://www.rx7store.net/product_p/extremefuelfd.htm

[chrisJDM]

also from them i got a nippondesno fuel pump which is a good upgrade fuel pump on twins, easy to install, no noise and a very good price

http://www.rx7store.net/product_p/nippondenso%20pump.htm

[hammy]

ah now thats useful info.......ooooh very tempting!!

cheers fish and sweetiewells

so the fueling aside, if i buy the pulley kit i\'ll need a blanking plate for the air pump?

and anyone got experience/views on different v-mounts?

cheers again!

[chrisJDM]

rx7store do a block off plate kit aswell

http://www.rx7store.net/product_p/block%20plates.htm

and they sell the pulleys

http://www.rx7store.net/category_s/86.htm

i dont work for rx7store honest :Thumbsup!

[chrisJDM]

I have a GReddy front Mount intercooler, brand new from ebay £400

http://cgi.ebay.com/ebaymotors/New-Trust-Greddy-Intercooler-kit-FMIC-FD3s-RX7-13B-RX-7_W0QQcmdZViewItemQQcategoryZ46096QQihZ019QQitemZ290212201755QQrdZ1QQsspagenameZWDVW

http://cgi.ebay.co.uk/JDM-GREDDY-FMIC-INTERCOOLER-KIT-MAZDA-RX7-FD3S-UK-STOCK_W0QQitemZ110229334440QQihZ001QQcategoryZ72205QQrdZ1QQssPageNameZWD1VQQ_trksidZp1638.m118.l1247QQcmdZViewItem

[ro284]

i\'ll need a blanking plate for the air pump?

Just checking if this is necessary if you go cat free! or can it just be left?
cheers

[chrisJDM]

it can just be left but its a pretty heavy pump so reduces a bit of weight from the engine bay and also frees a bit of space

[hammy]

yeah iv spied all that stuff, got a source in japan as well so will wait check the best prices.

thanks for the help, has cleared a few things up for me that i was unsure on.

just back down to the front mount vs v-mount debate and the advantages/disadvantages of both.....