dissapointed with t04r

Started by mattywhitt, February 29, 2008, 08:41:15 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

mattywhitt

It has done 1600 miles on a rebuilt engine. I will post pics up of the dyno print out later.



mattywhitt

I am booked in at Wgt on the 11th of March:D

BlitzBoy

hmmm at 13psi that is too rich at mid tens afr therefore killing power along with the high temps you were having
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

BlitzBoy

Just noticed the AFR line even hits 10 and a very low ten towards the upper rpm WAY TOO RICH,
Should be shooting for 11s or just under when boosting just under 14 psi.
Also the timing on the map needs to be checked as if this is not right this will further kill power
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

mattywhitt

They cant no what they are doing? Is it ok to run the car? Or take it gently? Will Pip sort me out? How much do you charge for a remap?

BlitzBoy

Pip at WGT will soon sort you out plenty of power to be released when he does the fuelling correct, you will probably release 70 bhp like Gandy did on our Dyno day last year when John and Wav tweeked his map he had lumpy rich fuelling as well
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

mattywhitt

Is it ok to use? I dont want to damage it!

BlitzBoy

you can run the car fine as its rich and not lean, so take it easy dont WOT it otherwise u might foul the plugs too quickly.
Im all the way down in London plus I map on the raod and the roads are too cold for me at the moment to be safe lol
So Pips ya man he charges quite reasonable plus you car will soo much better when he is finished
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

gsb876

Looks like it deffo needs a remap, a TO4R is a decent turbo unit on par with the T78 and making 450bhp @ fly is not unusual at all :Thumbs-up
"Every generation has the chance to change the world"

Mills & Bains guest author :Giggle

BlitzBoy

Brian Ellis on a T04R made well over 500 fly a few years ago
So these turbos do rock
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

mattywhitt

Cool thanks. He said £250 to map it. Would a t04z be much better? Or can i go bigger on a t4 flange?

mattywhitt

Its street ported, will that help? How much boost did he run to get over 500?

gsb876

Quote from: mattywhittCool thanks. He said £250 to map it. Would a t04z be much better? Or can i go bigger on a t4 flange?


I think the TO4Z is what Blitzboy runs on his FD :god
"Every generation has the chance to change the world"

Mills & Bains guest author :Giggle