Single turbo conversion

Started by Dele, February 11, 2008, 03:27:18 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Dele

Is there a guide on how to do this?
 
Basically ive been offered a cheap manifold and turbo, but i didnt know what else needs uprating or what else is needed
 
If its not going to be that cheap then i\'ll just skip it, but if it is then ill take it and get on with it
 
I imagine its something like this, but bare in mind im useless with a spanner so i might of missed something major or some parts that arent needed:
 
Manifold (got)
Turbo (got)
Oil lines
Custom intercooler tubing
Loop some water lines
Fuel pump and secondary injectors uprating
Custom ECU and mapping

interloper393

--------------------------------------------------

--------------------------------------------------

shaunwil

Wastegate,
blow off valve,
Boost Controller,
uprated radiator,
higher temp plugs,
stronger diff (depends on turbo size)
Gearbox and Diff Braces

What type of turbo is it ? This has been covered many times and the search button is your friend.

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

Dele

TD07

The clutch and radiator are already uprated btw

Dele

Cant seem to find much info on these, so they mustnt be that good?

shaunwil

Probably better off searching Rx7club. Not sure that many people have used that turbo. Doesn\'t mean its bad though

http://www.rx7club.com/search.php?searchid=4742495

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

Dele

Damn it

They are good but only if they are the larger .25 ones, i have no idea what this one is, all i have is these photos, its a huge long shot but its worth a try



interloper393

if u look on the inside of the turbo exhaust housing is there a number?
--------------------------------------------------

--------------------------------------------------

Dele

I dont know, i dont have the turbo with me lol

interloper393

lol ok.. i know some of them have numbers, it tells u how there set up, like slow spool more power less, faster spool less power, or a in-between... well tiz what i was told.. :S
--------------------------------------------------

--------------------------------------------------

leeroy_25

Turbo looks pretty small to me.. So I would guess it\'s a baby one? But that is only a guess..

Lee

interloper393

looks about TO4E size, should see you 350-400bhp tho
--------------------------------------------------

--------------------------------------------------

Dele

Well im sure ill find out soon enough as i just bought it for £110

Ed_RX7

sounds like a bargain...td07s are bigger than td06s......properly tuned you should see around the 400 rwhp with sufficient boost and porting...say 1.2bar and big street port.
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

Ed_RX7

p.s hope you asked if it had shaft play before you bought it?
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of