Hight of AST

[hugo]

Is the level of the filler neck for the water and the top of the air separation tank critical to one another, I wanted to move the AST but it would be 100mm lower than it is now and I wanted to know if that was ok or not.

Hugo

[Jono FD3]

I would say you\'d need to keep it about the same level as the stock position!!

[RemarkLima]

As I understand, it should be the highest point in the system...

Except for the throttle body it seems.

[interloper393]

so higher than the coolent filler neck? damm.. mine sits lower lol

[RemarkLima]

Well, not quite highest But higher than the low coolant sensor!

All of which is higher than the engine (but not the TB).

[interloper393]

hmm.. mines been moved so its off a bracket from the battery and sits lower, a wee remove i think, getting moved anywho as the bats going into the boot..

[RemarkLima]

I saw a pic of one mounted where the air pump used to live, seems like a good location and nice and high too

Could be worth a go?

[hugo]

Thanks for that gents,

Hugo