custom exhaust

[RotorHeid]

have a look at  corsa/saxco and it\'s got the same thing. very ballsy!

[flash76]

Are you getting the lights to fit the kit as well matey?
 
Dont forget to post plenty pics when its fitted. Was interested in the MK1 version of the rear end to go with my front a while ago, but wasnt sure so went another route. Interested to see how wild this one looks on a non RE show car
 
Chris

looked at the whole kit, think it was about 7k, but really wanted to try to make the car look original by mixing up diffrent bits of kits.
 
Have got the RE-A sleek lights to go with, so should help the front fit in with the rear, i just hope it dont look like crap when im done!
 
will post up pics when it all starts to come together.

[flash76]

The RE-amemiya car is a 650hp triple rotor.............. here is a link about it http://www.turbomagazine.com/features/0611turp_mazda_rx7fd3s_206/index.html
 
and if you look under Re-amemiya on youtube there is a video of it aswell.

[D2BBA]

looked at the whole kit, think it was about 7k, but really wanted to try to make the car look original by mixing up diffrent bits of kits.
 
Have got the RE-A sleek lights to go with, so should help the front fit in with the rear, i just hope it dont look like crap when im done!
 
will post up pics when it all starts to come together.

Are you going for the rear lights as well then bud?  Should help the individual look, but will be a good few extra £££s

Chris

[Archbish]

Just do a side exit exhaust just in front of the rear wheel!...

[AtomicRex]

We will soon have our new custom exhaust that is made here in the UK.

Its 2 criteria were:
Quiet so they will be under 98dB for all track use.
Long lasting Stainless with re-packable silencers.

They will be complete systems from Single turbo Manifolds to end pipe, and you will be able to choose from offside exit or centre exit.

The manifolds and wastegate pipes also come with the option of ceramic coating.

For those that decide they want to go for a centre system we also offer a fuel replacement cell.

They are due to us within the month, and we will get some pictures up of them then

[flash76]

xmas comes early! the bumper has arrived in 2 huge boxes from japan, the bumper kit contains- rear bumper , rear lights, carbon fiber diffuser and cf side generators for diffuser. its set up to use the normal exhaust exit with reverse light in center like on the pic i found on RE-A web site, will keep it like that for the moment, will start up a project thread with pics after xmas.

[Wombat-007]

Im just waiting for delivery of this Re-amemiya rear bumper, and i will need to get the exhaust done for the center exit, i have a racing beat at the mo, can it be modified or do i need a new exhaust custom made?
 
Also does anyone knows anywhere that custom makes exhausts?

Awesome looking machine. I have to agree that the exhaust looks best as a centre exit.
If you\'re looking for a reliable custom exhaust shop, I have used Flowtech, near Romford Essex. Paul has done a full stainless exhaust for my Corvette and the workmanship was second to none. I realise it\'s a bit of a hike from where you\'re at, but would be well worth looking them up for advise.
PM me if you\'d like the number.
Also, if you\'re thinking of selling on the racing beat, pls let me know.
 
Good luck on what will be an awesome maching (I\'m slowly turning green):Thumbs-up

[wackyracer]

We will soon have our new custom exhaust that is made here in the UK.
 
Its 2 criteria were:
Quiet so they will be under 98dB for all track use.
Long lasting Stainless with re-packable silencers.
 
They will be complete systems from Single turbo Manifolds to end pipe, and you will be able to choose from offside exit or centre exit.
 
The manifolds and wastegate pipes also come with the option of ceramic coating.
 
For those that decide they want to go for a centre system we also offer a fuel replacement cell.
 
They are due to us within the month, and we will get some pictures up of them then

Its better to take it to an exhaust workshop to get one made to the car rather than making one from a jig. The thing only has to be a tiny ammount out and you end up cutting the ****er up and welding it up again. I can do them at a reasonable cost if you want them done properly. Tig welded stainless to your own spec rather than off the shelf non fitters anyone? I can get them ceramic coated aswell although I wouldnt bother on a road car.

[AtomicRex]

Does that mean that Mazda hand make each of their parts for every car they produce??

We supply single turbo conversions, these are guaranteed to fit every car...and don\'t need to be individually made for each customer....it is the same with the exhausts.  The system you are after is no different than the systems we are producing for our own cars.

[wackyracer]

Does that mean that Mazda hand make each of their parts for every car they produce??
 
We supply single turbo conversions, these are guaranteed to fit every car...and don\'t need to be individually made for each customer....it is the same with the exhausts. The system you are after is no different than the systems we are producing for our own cars.

Of course mazda dont hand make their exhausts. However many of the RX\'s on the road today are very different from each other and in which case it is much better to have a custom one made on the car, and as I said the ceramic coating isnt needed. I\'d like to see your guarantee. Most of the cars I have worked on the parts dont just fit off the shelf, in fact they hardly ever just fit.

[AtomicRex]

The systems we are providing are designed by an engineering company that also build exhausts for an F1 team, single seaters, and touring cars.  I am confident they are more than capable of producing a product that is more than worthy of the job in hand.

Now Mr WackyRacer.....it\'s rude to not introduce yourself before starting to offer services.....so tell us a bit about yourself?

[wackyracer]

The systems we are providing are designed by an engineering company that also build exhausts for an F1 team, single seaters, and touring cars. I am confident they are more than capable of producing a product that is more than worthy of the job in hand.
 
Now Mr WackyRacer.....it\'s rude to not introduce yourself before starting to offer services.....so tell us a bit about yourself?

Now Mr Atomic Rex. My name is Stuart, I have 2.4 children a wife, a girlfriend and a dog. MY neighbour has a cat which prefers "whiskas" rather than "go kat". I have been a mechanic for many years and specilaise in fabrication and welding of most materials as well as GRP, kevlar and carbon. I have ran a historic F1 car so as for your top trumps game I have done it and got the T shirt rather than know someone who has the Tank top. So tell me about yourself as you seem to have taken an interest in me. ;0)
 
WaCky RaCeR