Main Menu

Ecu?

Started by EDZAIRX7, September 11, 2007, 12:12:25 AM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

EDZAIRX7

Hello, Does anyone know where MAZDA RX7 J-REG ECU is , i have checkted everywhere but couldnt located..
 
 
AND would it give problem if i reset and soes anyone know how to reset ..
 
My car keeps cutting power, m on 40th on 3rd gear... RX7 too much headahe mannn
 
offffffffffffffffffffffffffffffffffffffff m gin crazy  :Hammer :Hammer :Hammer
 
 
THANK YOU IN ADVANCE

m4drx

no idea what your on about :rollin

but the ecu is in the passenger foot well.

take the metal/plastc sill cover off (the one that reads RX7) then pop the plastic screw clip things out. job done.

to reset disconnect the negative terminal hold brake pedal for 20 odd seconds then reconnect and your done.

whatever is causing the car to cut power it will remain i would say so finding that should be priority.

sounds like boost cut due to rats nest problem most likely.

hth
fduk.

EDZAIRX7

so basiacly you saying - reseting ecu wouldnt fix the problem.

Let me explain the problem PROPERLY. EXPERTS PLEASE HELP ME OUT - I RESPECT THAT MANNN---

OKEY HERE WE GO


THE CAR IS  MAZDA RX7 UK SPEC - DCATED - NO CAT - I NEVER CHECKTED THE ECU BUT I THINK IS STANDART ECU.

THE PROBLEM I AM HAVING IS -

CAR STARTS PERFECTLY - A BIT WHITE AND BLACK SMOKE THEN IT CATS - COMES AND GOES -


I PUT FIRST GEAR  - CAR GOES ABOUT 10MPH THEN IT CUTS  THE POWER I MEAN THE SPEED -

SECOND GEAR 20MPH  DOES THE SAME - THEN 3rd GEAR CAR ON 40MPH


SOMETHIN CUTTING THE POWER - SPEED WISE


I HOPE I DID EXPLAIN AND PROF RX7 OWNERS WILL HELP ME OUT


SORRY MY POOR ENGLISH

EDZAIRX7

#3



 I WAS PLAYING ARROUND WITH THEM - DO YOU THINK MAY BE I DONE MISTAKE

THATS WHY ITS CUTTING THE SPEED


:cheers

Brett

Do you have the accelerator pressed all the way down when this is happening?
Brap Brap Brap Brap

grinder

if its decatted - you could be spiking the boost - so you are hitting boost cut ( safety feature )


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

Prof

Quote from: EDZAIRX7THE PROBLEM I AM HAVING IS -
 
CAR STARTS PERFECTLY - A BIT WHITE AND BLACK SMOKE THEN IT CATS - COMES AND GOES -
 
 
I PUT FIRST GEAR - CAR GOES ABOUT 10MPH THEN IT CUTS THE POWER I MEAN THE SPEED -
 
SECOND GEAR 20MPH DOES THE SAME - THEN 3rd GEAR CAR ON 40MPH
 
 
SOMETHIN CUTTING THE POWER...

Sounds like it cuts when you hit a particular RPM limit, and quite a low one at that !
 
Is the car fitted with an ignition amplifier - maybe one that has a security ignition cut - it would allow the car to be started, but would impose a very low rev limit on it.  The Crane Cams Fireball amp\'s have this feature - there should be a defeat switch for it.
 
Other than that, it sounds like the ECU is going into \'limp home\' mode - which would suggest a sensor fault or ECU problem somewhere.
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex


m4drx

you need to check if its a stock ecu, take a pic and we will verify for you.

if it has decat you either need an aftermarket ecu (e.g. apexi) and/or a boost controller to stop boost spike then the ecu cutting power.

do not keep putting your foot down until you have verified the above or get a cat and put it back in.

I have one and im not too far if needed but check everything first to verify problem.

hth
fduk.

EDZAIRX7

1) SPEED CUT - SOLVED - Prof knowlege helped me out THANKS
 
2) I NEED TO SOLVE SMOKE PROBLEM
 
 
Hello - THANK YOU ALL For helping me out and
QuoteThe Crane Cams Fireball amp\'s have this feature - there should be a defeat switch for it.


 
THERE WAS A BUTTON - STIWITCH - NEXT TO THE GEAR - I PRESS THAT BUTTON THEN - CAR GOING  - SO PERFECT SPEEDWISE WHOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
 
BUT THEN AGAIN AS IT DCATED FROM PRE OWNER
 
SMOKE COMIN OUT FROM THE ECSOZE  - WHITE AND BLACK -
 
I THINK TOO MUCH FUEL FLOW
 
 
 
 
 
THANK YOU VERY MUCH FOR EVERYONE POSTED AND  HELPED ME