Crikey! 430bhp twin!?!?!

[chrisJDM]

Sounds awesome mate, i seen your car up at trax but didnt see you about, i was parked over with another club this year.  We will have to have another cheddar meet at some point aswell as that was good next time, see if we can get a few more rotaries out and make some more kids scream :yes

Yes mate with more power to come......note I\'m still only on an extended street port.
Down to ReWORX on the 20th to sort out me W/Gate spring from 0.8 to a 1 bar one. Then a remap and that should make it 500bhp at the rear wheels on pump fuel. That will then be a target reached.:Party :Party :Party

[Alex T]

im sure those are seats out of an evo ?

You could be right there.
Seen that done in an FD before actually.

[Kevin]

LIMITED SLIP REAR DIFF (INCAR CONTROLLER)

.....:confused: :xconfused

FULL JAPENESES C WEST DRIFT BODY KIT

I see the front bumper but were is the rest of it? :confused:

Also what is "Japeneses"?

[RobMatthews]

this is starting to sound like a barryboys .com thread!!!

[RobMatthews]

Ok i\'ve just looked at the car and this guy should be shot for doing that to an rx7 it looks like he had to many vouchers for halfords on his birthday.

[chrisJDM]

hehe halfrauds rule!!! :Thumbsup!

[Jono FD3]

430 is doable on twins guys..... there is one on the site somwhere!! although they would have to be the uprated aftermarket High flow twins with all the other mods to boot!!

Jono

[Grizzly]

Realistically thats properly more like 330 if that for the simple reason it doesn\'t say anything about the ECU which the tag "Mapped in japan" tends to mean it has a Chipped stock ecu, I may be wrong but if it did have a Power FC looking at the Add i think it would say, but then i get the idea this guy doesn\'t know allot about the car so that 430 is most properly a Miss educated guess??? Who knows it may have Knightsport Twins or something tweaked on there but reading between the lines the guy has fitted a Cheap after market alloy IC so he properly got it with the Stock one still on?? so i\'d bet the cars more on the stock side with a few bits hes put on himself.

Lets put it this way, if i went to buy that car and the HP figure was a key element i\'d want to see the Rolling road print out where he has got his Figures from, its just a sales pitch to get some Chav who\'s dazzled by the Fast and Furious to hand over his cash.

[chrisJDM]

430 is doable on twins guys..... there is one on the site somwhere!! although they would have to be the uprated aftermarket High flow twins with all the other mods to boot!!

Jono

I would say its quite easily doable even with the normal twins.

apexi power pc
big street port
1600cc injectors
higher flow fuel pump
full system, decat, downpipe
uprated intercooler, v mount or front mount
water injection
mapped to 1.1 bar, could even push 1.2 bar

probably a few other bits im forgetting lol

this is the spec im looking at, all done apart from water injection and mapping to 1.1 bar but once all that is done shouldnt be too far off 430bhp @ fly and still on the standard 1992 turbos

[chrisJDM]

its just a sales pitch to get some Chav who\'s dazzled by the Fast and Furious to hand over his cash.

Funnily enough one of them will probably fall for it, they take what is written as true if they dont know sod all about the car, and if it looks nice then surely it must be high power :o

[Grizzly]

Yeh, i have to admit when i was new in the FD world i was Dazzled by the Looks but i didn\'t use a Loan etc to buy mine so it was proper Graft money so i wanted to know exactly what i was getting, Different if its some one else\'s money your buying it with

[Grizzly]

I would say its quite easily doable even with the normal twins.

apexi power pc
big street port
1600cc injectors
higher flow fuel pump
full system, decat, downpipe
uprated intercooler, v mount or front mount
water injection
mapped to 1.1 bar, could even push 1.2 bar

probably a few other bits im forgetting lol

this is the spec im looking at, all done apart from water injection and mapping to 1.1 bar but once all that is done shouldnt be too far off 430bhp @ fly and still on the standard 1992 turbos

I think there is more to it than bits, you have to have a Tuner that really knows there Stuff (not what they call a Safe Tuner), But in my neck of the woods 1 bar is the Limit on Stock twins before you see problems, 430 may well be Doable buy for how long? well your guess is as good as mine but you ain\'t talking years.

A mate of Mine had his Fd set up at 1 bar (trackdays and such) and it lasted a year before it started kicking blue smoke out on overrun so he went single.

[pete sparrow]

Either someone miss read or the guy has changed his add. It now reads 330bhp wnich is slightly more believeable..

[trotter]

anyone else notice that its bn changed to 330bhp now?! lol lol lol

[Grizzly]

he\'s proberly seen this thread