sorry my rex will not be going rota 4

adib · August 04, 2007, 10:31:36 PM

had a petrol leak fixed it, put car back together and it started did not run more than 2 mins poping and now it will not start :mad:
i snapped the sensor on the back off the thing you fill the water up,there is one at the front with one wire coming from it and one at the back with 2 wires from it would this be the problem.
looks like a year wait and my rex will not be going :Grrr

Laeeq · August 04, 2007, 11:44:38 PM

them 2 wires are for water level sensor so cant be those. Have you checked the plugs + the leads? It could also be you TPS or check a green plug just under the water hose that goes in the plenum near the firewall also check the boost sensor near there. I hope it helps...

m4drx · August 04, 2007, 11:51:38 PM

ive got all the spares you may need. tps, coolant sensors etc so give me a shout if you need anything quick before rs4 mate.

adib · August 05, 2007, 10:17:13 PM

went out this morning turning over but not even trying to start :mad:
thanks m4drx mite be in touch tomorrow and thanks for the offer , so p***t of a week before rota stock 4
had car 3 years and done all work on it my self with no probs before

clive · August 05, 2007, 10:22:46 PM

Hi Adrian,

This really sounds like no more than a petrol flooded engine, follow the deflood on the site by useing the search button above

adib · August 05, 2007, 10:51:31 PM

hi clive its not flooded had that before there is no snell off petrol going to strip it tomorrow and have a look, do the water senors not do any thing to the pfc
thanks adi

adib · August 05, 2007, 11:06:20 PM

sorry clive forgot to say it started pop pop bang and then cut out and does not want to no now

arrouk · August 06, 2007, 12:16:03 AM

it sounds flloded to me too, have you tryed new plugs? also get thoes sensors sorted as they go to the ecu so it cannot be helping.

matt