Swirl pot?

Initial-D · June 12, 2007, 10:19:05 PM

Just having thoughts about wheather I really need to go for a swirl pot (in car or somewhere safe underneath) or just get a baffle that sits in the tank, which is far cheaper and queiter. I need to do something as at half a tank or less and I get awful fuel cut which isn\'t good.

Any advise or suggestions welcome!

AtomicRex · June 13, 2007, 12:02:01 AM

You can buy mine if you like?

You should also buy the extra fuel lift pump and pickup....stick it in the tank and then you can have pick up from both sides.....

Can help you with this if you need it.

stylus350 · June 13, 2007, 08:59:35 AM

Quote from: Initial-DJust having thoughts about wheather I really need to go for a swirl pot (in car or somewhere safe underneath) or just get a baffle that sits in the tank, which is far cheaper and queiter. I need to do something as at half a tank or less and I get awful fuel cut which isn\'t good.

Any advise or suggestions welcome!

Have exactly the same problem. I do have a swirl pot and Facet Red top pump kicking around too but do not fancy the pot in the boot. Where else could one be mounted? I am sure there are others in this situation. I hope there are some other solutions.

Initial-D · June 13, 2007, 11:19:07 AM

Atomic Rex I\'ve sent you email.

Does anybody here run a baffle in tank along with uprated pump? Any other thoughts on mounting for the swirl pot?

Smifta · June 13, 2007, 01:11:05 PM

You can remove the charcoal canister and mount the swirl pot externally there.

BlitzBoy · June 13, 2007, 01:46:58 PM

Yep thats where my swirl pot is mounted in the charcoal canister position on the left rear wheel arch

stylus350 · June 13, 2007, 04:40:50 PM

Quote from: BlitzBoyYep thats where my swirl pot is mounted in the charcoal canister position on the left rear wheel arch

Ive had a very quick look and can see a black canister. Would be ideal! What does it do now though?

BlitzBoy · June 13, 2007, 04:51:47 PM

what the swirl pot or the canister? , the canister is just deleted.
The swirl pot was designed by Reworx who fitted mine

RemarkLima · June 13, 2007, 05:27:44 PM

The charcoal canister is just that and filter any fuel vapours through it so the car doesn\'t stink of petrol

stylus350 · June 13, 2007, 05:48:51 PM

Quote from: BlitzBoywhat the swirl pot or the canister? , the canister is just deleted.
The swirl pot was designed by Reworx who fitted mine

The canister. I have used swirl pots on other cars before.

stylus350 · June 13, 2007, 05:49:29 PM

Quote from: RemarkLimaThe charcoal canister is just that and filter any fuel vapours through it so the car doesn\'t stink of petrol

Fanx :Thumbs-up

jetpilot · June 15, 2007, 07:48:22 PM

If you speak to Gary at Rotary Art, i think he is in the process of being able to supply in tank swirl pots!

Mazdarotaryparts · June 15, 2007, 08:27:35 PM

Hi All,

We are already able to offer under car swirl pots that bolt to the back of the FD subframe or if you supply your own dimensions we will have a custom tank made for you for the same price.

You can order these here if you wish and don\'t forget MRC members can log in to get their MRP 5% discount.

oldone · June 15, 2007, 08:46:06 PM

What about lil swirl pots for the N\\A motors Clive.To be fitted near the the carb,to feed the IDA ? Any idea\'s ?.........:wiggle

Mazdarotaryparts · June 15, 2007, 09:27:07 PM

Quote from: oldoneWhat about lil swirl pots for the N\\A motors Clive.To be fitted near the the carb,to feed the IDA ? Any idea\'s ?.........:wiggle

Yep we can do small 1 liter swirl pots for carby cars to order and also the old Bendix style Blue Top fuel pumps as well (bit better than the standard Red Top) as well as carb system regulators, in line filters and even the good old Filter Kings infact we can supply whatever you need to power up yer fuel system.

Indeed we had a Gen 1 customer just a couple of weeks ago who purchased most of the above.

Hope this helps,

Swirl pot?

AtomicRex

oldone