little advice

Started by rx7_andy, May 24, 2007, 11:40:57 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

rx7_andy

May 24, 2007, 11:40:57 AM
would 6k get me a rebuilt engine and a single turbo with all the bits i need? thanks :Thumbsup!

rx7_andy

#1
May 24, 2007, 11:51:08 AM
looking for about 400bhp at the fly

sadgoth

#2
May 24, 2007, 12:28:42 PM
possible, but would be cutting it a biy fine on the finance front I would suspect.

Depends on if you sourced the parts yourself I guess, what turbo you were going for and what ancillaries you would need.
Mark
89 Black FC3S Turbo II
1/2 Bridge port   Microtech LT10s   TII Conv Aluminium Bonnet & Leather seats   Koni Shocks Pi Springs   De-catted 3" exhaust  
GT4088 turbo   Walbro fuel pump   1000cc injectors   custom V-Mount   Blitz Boost Controller (ok so the boost controller is still to fit)

Loud? Hell yes! :D

mazda bait

#3
May 24, 2007, 04:56:48 PM
If your after a turbo this might be the way forward

http://horsepowerinabox.com/HPIAB2/index.html

Seem about the most reasonable you\'ll find...

Good luck:driving
Anyone who lives within their means suffers from a lack of an rx7.

ttpower

#4
May 25, 2007, 03:53:44 PM
really depends on how much your rebuild is going to cost? and its hard to determine that until the engine is stripped, but worse case scenario id say you get 400bhp on the fly with 6k.
Print
Go Up Pages1
User actions