pics of my bits and pieces!

Started by leeincivic, April 27, 2007, 02:29:05 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Print
Go Down Pages1 2
User actions

leeincivic

April 27, 2007, 02:29:05 PM Last Edit: April 27, 2007, 02:59:36 PM by leeincivic
hey gents just thought  would post some pics of what i have been up to with my car, mods i have done are:

smoothed boot (spoiler holes, wiper and aerial)


custom vented headlight cover which i did


non sequential setup

battery relocation to boot (with obligitory fire extinguisher:Laugh )


greddy pulley kit, polished elbow and airinx induction (thanx interloper)


trust greddy spec-m fmic

lowered it more with the cusco coilovers

interior resprayed in grey with omp suede steering wheel and wardwired road angel


painted all calipers



as you can see i have been busy and skint!!! lol

next thing is new bodykit, apexi clutch, flywheel and apexi power fc then it is where i want it to be then!!!:Laugh

let me know what ya think guys!!

lee
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

rx7veilside

#1
April 27, 2007, 02:35:21 PM
how did u hardwire the road angel did u get a spare lighter socket

peterwolds

#2
April 27, 2007, 02:35:48 PM
very nice a lot of graft gone into it :Thumbsup! ,prefer spoilers myself not a fan of bare backs
:Typing Pete

leeincivic

#3
April 27, 2007, 02:42:30 PM
Quote from: rx7veilsidehow did u hardwire the road angel did u get a spare lighter socket

i took the feed off the lighter socket and put in a switch next to the switch i have for the fan mod

:chat
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

M@r]{

#4
April 27, 2007, 03:47:35 PM
Like the spraying you did on the inside in grey.  Benn thinking about doing that myself....for the last year!!  Have all the bits I want to spray in the garage as spares.  

What colour did you use?  Any tips on getting a good finish?

Fish

#5
April 27, 2007, 05:16:02 PM
Those wheels dont match the car, you should sell them to me on the cheap. ;)

Fish

gmogle

#6
April 27, 2007, 05:16:41 PM
Looks ace what you have done there mate !!!

Now is the bonnet next ?!!!!?

Love the wheels....mmmm CE28s....obviously biased because I have them too.

d-king

#7
April 27, 2007, 05:20:35 PM
noticed you are running a front mount mate without an apexi ? is this wise or dont it matter ? was wanting to do it myself thats all ???

leeincivic

#8
April 27, 2007, 06:15:38 PM
Quote from: \'M@r{\']Like the spraying you did on the inside in grey.  Benn thinking about doing that myself....for the last year!!  Have all the bits I want to spray in the garage as spares.  

What colour did you use?  Any tips on getting a good finish?

it was rover gunmetal grey, robbed the idea off a thread i saw by dj dee99 (sorry:p)

just takes alot of patience, the hardest part was getting the stock rubber coating off the plastics so its all just prep really rhen the paint will look a treat:chat

Quote from: \'gmogle\'Looks ace what you have done there mate !!!

Now is the bonnet next ?!!!!?

Love the wheels....mmmm CE28s....obviously biased because I have them too.

yeah i am after a scoot bonnet if you know anyone that is sellin!
i hate what the previous owner has done with the vents, looks to much like nova mods!! lol

Quote from: \'d-king\'noticed you are running a front mount mate without an apexi ? is this wise or dont it matter ? was wanting to do it myself thats all ???

i would imagine it aint the best thing to do but i aint drivin mine due to the fact the clutch is dead!! until pip at wgt waves his wand over it after me trauling it to him on a trailer!!:Giggle


cheers for the comments gents keep em comin:cool

ps nice try Fish! lol
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

Habanos

#9
April 27, 2007, 08:32:33 PM
How was it painting the brake calipers?

Noticed the MAZDA painted in white, thought about doing this but I can
imagine it\'s a nightmare!

Any tips?

JB

leeincivic

#10
April 27, 2007, 09:43:45 PM
surprisingly easy really jb, red was just halfrauds brake caliper paint and as for the white i just used a really thin brush and took it slow and steady with some hammerite which is quite thick which helps:chat
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

Habanos

#11
April 27, 2007, 10:27:31 PM
I have some Halfords silver caliper paint but I think either the red/white you have or black/red would suit mine best.

That\'ll give me something to do tomorrow.

JB

leeincivic

#12
April 28, 2007, 12:13:01 PM
Quote from: HabanosI have some Halfords silver caliper paint but I think either the red/white you have or black/red would suit mine best.

That\'ll give me something to do tomorrow.

JB

i have found these that may help you with spraying your dash and also may help anyone in the future!!:rollin

http://kalecoauto.com/index.php?main_page=product_info&cPath=7&products_id=20

lol!!! lee
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

leeincivic

#13
April 29, 2007, 01:55:21 PM
can someone give me some insight if this is worth it or not?

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=015&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=250107349872&rd=1&rd=1

just dont wanna end up throwing my money away

cheers lee

ps thanx for good comments lol
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

SavageUK

#14
April 29, 2007, 02:56:57 PM
i think i saw this down at WGT on saturday? if not, almost an exact replica. the painted calipers are spot on and look great, am going to attempt myself  now.
Print
Go Up Pages1 2
User actions