Additional Injectors

Started by imebgo, April 27, 2007, 01:13:23 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

imebgo

Some people upgrade their injectors and rails, some stick them in the elbow, and I have have seen some in the plenum, is their any difference in upgrading the rails and injectors and just sticking a couple in the plenum or elbow?

Im upgrading my fuel system to go with a T04S, this is being matched up with a Bosch 044 fuel pump and an Aeromotive FPR, Im guessing 850cc all around should be plenty, OR. maybe just plonking a couple in the elbow, or is this restricting me in the future?  I will be running a stock engine for the time being and then rebuliding with some sort of port.

Cheers, James

imebgo

Can I fit the Bosch pump in place of the stock pump without remapping?

I havent started the modifications yet, but if I wanted to fit the pump with out the rest of the mods to start with?

I have been reading about fitting the pump in/out of the tank, does it notjust go in place of the pump thats in the boot?

Thanks,

James