T04R - what power before mods?

Started by dazsir, April 26, 2007, 08:23:31 AM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

dazsir

Apart from the usual, MOD, to fit, such as removal of the Air pump....

What sort of power figure and boost pressure can I see before I need to upgrade the fueling?  I have a power FC, will get it mapped at WGT, but would like to know if it would be beneficial to buy additional injectors, etc.  I have a plenum that has the bosses already fitted, ready for extra injectors?

I am looking for about 400 either at the fly or the wheels, preferably at the wheels!

Thanks

:burnout

Freddy

Depends, if you up the fuel pressure then 380 ath maybe little more is possible. Around 0.9 - 1 bar. However, I\'d definitely recommend buying additional injectors!

BlitzBoy

You have not got enough fuel for 0.9 BAR ! even if you have upped the fuel pressure and pump its still stock injectors!

this is a T04R not exactly a small turbo :rollin

the most you be able to run is 0.7 BAR safely.

Go 850s all round (primaries and secondaries) bigger fuel pump decent FPR then you can run 0.85 of a BAR safely then you will see 350 at the wheels on a stock ported engine
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

dazsir


Freddy

BB with a adjustable fpr and bigger pump. I\'ve seen 410atw like this on T04Z at 1 bar. Albeit injector duty will be near full.

dazsir

What fuel pump and FPR do you recommend?

Thanks