bhp predictions ????

Started by shaunwil, April 20, 2007, 05:43:58 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

shaunwil

I\'m off to pips tomorrow to finalise my LPG tuning and im wondering what i should expect :mmmm

The car has a stock nikki carb with a impco 300a bolted on top. I have pips stainless exhaust system without any of the emissions stuff.

I\'ve just renewed my dizzy cap, rotor arm and coils for new and pip will be removing the emissions stuff off the engine tomorrow.

The engine is a stock port 12a n/a with 110k miles on the clock.

The LPG is 107-110 ron so makes this interesting :D

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

MikeLMR

whats the prize for guessing correctly?

 I am going to say 70hp at the hubs :)

shaunwil

Satisfaction :D

Thought the stock setup was more thn that with the emissions on ???

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

MikeLMR

I think Mazda were a little optimistic in their figures and it\'s only a guess :)

Brett

Brap Brap Brap Brap

John Yorke

Quote from: BrettI will say 100atw :yes
How can you quote ATW with a hub dyno??????

Brett

Because I have no technical basis for my prediction and thought 100 was a nice round number :D
Brap Brap Brap Brap

shaunwil

lol, atw is 10% less. Im hoping for about 100bhp at the hubs.

Probably overly optimistic.

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

grinder

hummm i reckon about 105 at the hubs :D


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

mpk490p

ok i will split it 95:chat
Mark

mr.bishi


shaunwil

im still hoping the higher figures :D

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

antnicuk

my 1st gen with a racing beat exhaust and all the emmissions removed made 115 atw\'s on the re worx dyno but that only had 44k miles on it.

I\'m not sure how much you will lose on the gas, my BMW doesnt seem to lose much but its a multipoint seqntial system.  

I reckon you should see 110 at the hubs on petrol, maybe 90 - 95 on gas.

good luck tomorrow

PS:   I took a stock first gen round the track on the north weald activity day and managed to drift quite well with no power and an open diff , so you will have a great little car when its done.
400 BHP - 650 KG\'s = 616 BHP Per Ton of Rotary Power

That\'s the way to do it! :Thumbsup!


shaunwil

Yep, the handling is so much fun. Get the same feeling with that as with the FD, just at much lower speeds :D

Can\'t wait to swap all my bushes over and have it running like new !

Hopefully with the gas running higher octain i should see good results :D

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

gsb876

I will predict 92.453509213bhp  ATH\'s :Laugh

Like to be accurate you see :Laugh
"Every generation has the chance to change the world"

Mills & Bains guest author :Giggle