Re Amemiya kits for the Cosmo

Started by pintglass, April 11, 2007, 11:56:30 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

banned advertiser


kev-yorks

This is a pic i\'ve pinched from Dave Morris\'s site on a 20b but the induction set up is the same on a 13b and it shows what i mean.
Kevin
Regards Kevin

pintglass

Wow, thats a BIG cone filter.
 
Hmm, tempted to save for piggyback ecu first, get the car mapped as is then change the air box for a cone filter and see what occurs...

banned advertiser

Looks like they have fabricated a vent underneath the filter in to the body work

pintglass

Think that vent is standard, had my airbox off the other day and that pipe goes straight into the bottom of it

kev-yorks

That is standard Gary in the o/s lower bumper of the car is a air inlet the gearbox oil cooler is mounted within this then it feeds up through the pipe you can see to the filter.
Ricky thats small i\'ll post up a pic of the one i\'ve put on mine tommorow evening.
Kevin
Regards Kevin

pintglass

Thats small!?
 
Can i ask where you got yours from kev?

banned advertiser

Some are huge
Have a look at some of these puppies (must get piccys working just spotted this) rating to 885bhp on N/A you can add 20 for Turbo rating
http://www.rotaryart.uk.com/acatalog/Universal_Straight_Filter_57mm_to_152mm.html

kev-yorks

I use a K&N filter if you go on there website they do a on line catalog with all there filters and sizes so its just a case of going through it until you find what you want jot down the part number then ring your nearest agent.
Kevin
Regards Kevin

pintglass

Thanks Gary & Kev,
 
You have opened my eyes to a whole new world of induction madness
 
Ricky

kev-yorks

#25
Here\'s a link to whats on mine this year Ricky. http://www.knfilters.com/search/product.aspx?Prod=RC-3160
 
I specialise in madness Ricky you should see what its bolted to.
Kevin
Regards Kevin

banned advertiser

Think at last count I had over 400 different universal filters on site all should have sizes and bhp ratings if it helps

kev-yorks

As promised Ricky the filter is right over the cold air feed. On the stock twin setup it works just the same as in the earlier pic you just need to place the filter onto the air flow meter which puts it in the same area.
Kevin
Regards Kevin

brunge

My god thats a fine looking 20B! :god :god :god :god

kev-yorks

Right i\'ve checked with Newera and these are still available prices where not as bad as i thought either though your looking at eight week delivery to your door. I can see the bank account getting a hammering again.:D
 Stage three of the mod sequence is taking shape.
Kevin
Regards Kevin