help please!

[richrx]

or maybe someone who\'s going but not running could let you borrow theirs. Worth a go


rik

[antnicuk]

which bit do you need,

[carlos]

ok so wot do i need?
rotechnics r 2hours from me, she runs fine wen taking it easy
im so pissed now:reallymad

[carlos]

will need the whole box as 1 of the plastic connecters broke in 2 pieces!

[richrx]

take the box inc broken bit down and see if they can help. They\'ll have loads of bits lying around im sure.

If you wanna go all out they may even have a PFC on the shelf:D

rik


p.s good luck taking it easy for 4hrs;)

[carlos]

is it easy to fit a pfc?

[richrx]

not done it so i cant really comment, it is plug and play though.

i cant imagine its too hard.

what part is broken? is it stopping it working?thinking about it you may beable to still use it on a temp basis if you use tape.


rik

[antnicuk]

ten minute job,  once you have uncovered your ecu, (passenger footwell)  its just four plugs.  I am using a Power fc. I would recomend having the commander with it unless you can borrow one.

[carlos]

the connecter that is broken is in loads of bits! as i undone the rubber pipe it disintegrated which is a bit of a arse! miracle tape i need!

[antnicuk]

i have a box which i dont need, you are welcome to come and collect it from harlow tomorrow or if you wish i can bring it on sunday as i am coming to watch  .   give me a ring in the morning and i will check it is in one piece when i get to my workshop.   tony  07968 061 567

[richrx]

Originally posted by richrx
or maybe someone who\'s going but not running could let you borrow theirs. Worth a go


rik

thats wot i said:rolleyes:

rik

[carlos]

cheers tony!
can i call u 2morrow as im going to call nemsis 1st thing to c if they have got a ecu in stock! wot do i need to ask them again?

[bnaellis]

May well be fuel cut, but also the pipe you blanked off is the one that should have a rubber hose connected to the charge relief valve what\'s happened to that?
On the apexi filter below on the thin pipe you should have the other rubber hose connecting to the bleed valve which goes to the y pipe above the turbos.


rgds

[carlos]

wen i fitted my bov i had to blank off the top connecter from the air box, so i guessed that wen i fitted the induction kit the blank went there

[scooby_si]

from my opinion/experiance FCD is merely a modification for the symptom & not the problem ie not a good method of correcting said issue
Si