Which of these Coilover\'s should I buy?

Started by Kash_, March 05, 2007, 09:45:31 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Kash_

Hi Guys

I have a list of four options for a new set of coilovers for the Rex:

1. G4 RACING Coilovers
2. KSPORT KONTROL PRO Coilovers
3. Megan Coilovers
4. Tein Superstreet Coilovers

Which one would you guys recommend? :3Confused
I would obviously like the best handling and most suitable for street driving.


Thanks

LRP

i run k-sport and find them very good ,easy to set up ,and not to harsh for street use but can also hold there own when you giv the car some abuse !
complete wankel :god

Warthog

With my power I have had no probs with the Tein had them for 4 years they were the middle ones in the range. They keep my FD planted as I have had them and the whole geo set up done professionally. I also have the Racing Beat Anti-Roll Bars fitted.
I\'M ALWAYS IN THE SH*T IT\'S JUST THE DEPTH THAT MAY VARY.

Project Evil seven.:evillaugh

RE:WORX---13b RE engine, Motec M400 Pro ECU, Os Giken 5 speed internals-Gearbox, HKS T51R KAI turbo, With 575 @ Fly, 487.9 @ Wheels @ 1.3bar 420 ftlbs, on PUMP FUEL Sheel V-Power. BUILT & TUNED BY RE:WORX. More work planned..:InLove

REW, Stock Twins, RE:WORX-- British Record, 389.2 @ Wheels -- 03/09/2005.

allstaruk

John how much of a differnce did the racing beat anti roll bars make and what sort of price were they?

Alan

Warthog

The difference is --well total. If you want to rail a corner eg at Silverstone you just turn in and it does it. Hitting the Apex is there.
I got them from RE;WORX they come in three parts front, rear and front bracing strut. Think it\'s under £300 but you will need to check out there site.

http://www.reworx.com/
I\'M ALWAYS IN THE SH*T IT\'S JUST THE DEPTH THAT MAY VARY.

Project Evil seven.:evillaugh

RE:WORX---13b RE engine, Motec M400 Pro ECU, Os Giken 5 speed internals-Gearbox, HKS T51R KAI turbo, With 575 @ Fly, 487.9 @ Wheels @ 1.3bar 420 ftlbs, on PUMP FUEL Sheel V-Power. BUILT & TUNED BY RE:WORX. More work planned..:InLove

REW, Stock Twins, RE:WORX-- British Record, 389.2 @ Wheels -- 03/09/2005.

allstaruk

I have my good man can\'t see them on there though.

Alan

J.j.


20B_boy

Alan; front a/r bar is about 120 quid + vat, rear is the same again. And the front brace (optional) for the a/r bar is another 70 quid + vat.

Jj; no, John has HAs from recollection which arent made now. They are simliar to Flex i.e. harder than super street.

HTH.
R.

Warthog

Bless you Rich, you been looking under my Fd again.:spank
I\'M ALWAYS IN THE SH*T IT\'S JUST THE DEPTH THAT MAY VARY.

Project Evil seven.:evillaugh

RE:WORX---13b RE engine, Motec M400 Pro ECU, Os Giken 5 speed internals-Gearbox, HKS T51R KAI turbo, With 575 @ Fly, 487.9 @ Wheels @ 1.3bar 420 ftlbs, on PUMP FUEL Sheel V-Power. BUILT & TUNED BY RE:WORX. More work planned..:InLove

REW, Stock Twins, RE:WORX-- British Record, 389.2 @ Wheels -- 03/09/2005.

McCARTHY

Tanabe Pro SS or Pro SS type II depending on use.

Kash_

hi guys thanks for the responses
still undecided so if i could get a few more peoples opinions it would help me decide

warthog are your teins superstreet or one range above ?
thanks