New Pink Panther pics

[Roundabout-Now]

Here\'s a few new pics of the Pink Panther since I got it back from Pip on Friday. Still needs a good clean

First pic shows the engine bay before (left) and after so you can see the changes to the rad piping and the huge new air filter.

[Roundabout-Now]

2nd pic with close up of airfilter/piping

[Roundabout-Now]

The right hand side - no more japvillage stickers, ready for new ones to go on. Took me all evening friday with the hairdryer getting those damn things off.:p

[Roundabout-Now]

The new bonnet pins - no more flying bonnets.

[Roundabout-Now]

And the inside showing the new A-pillar pod with 60mm water and oil temp Defi gauges and the new stereo.

[Roundabout-Now]

And just a final shot of the car - I will take some of the boot when I remember to show the battery enclosure and sub box/amp.

[mraraju]

nice car, not sure about pink though, i bit kemp me thinks!!!

You sure u need all them gauges!!

Looks good though,

[Roundabout-Now]

s\'not pink, \'s magenta It looks a lot pinker in the photos than it is. Weird thing is that the colour sort of grows on you after a while. And the sound makes up for the colour, nothing camp about the noise it makes. After all, I bought it for the engine, not the colour

All the gauges are great - I just have to remember to look at the road every now and then.

:rollin

[20B_boy]

Did u do the magazine-thing in the end mate?

Best guess of body;

Ab-flug nose
Mazda or may be RE-A side skirts
RE-A rear arch trims
RE-A rear wing

So did Pip give u (it!) a clean bill of health?

[Roundabout-Now]

Magazine shoot is on Friday. That\'s why I was out in the rain this morning taking pics, so that I could post them up and get opinions on what the bits are on another thread.

From what I could find on the net this morning, I also got it as an Abflug (or copy) nose and front bumper, Re-A sideskirts, Re-A or mazdaspeed mirrors, Re-A Wing.

When you say rear arch trims, do you mean the 2 little bits added on to the sides of the bumper?

I wasn\'t sure if the vents behind the front wheels were standard either?

Pip seemed happy enough once the piping for the rad was done and the filter was on. He checked the fuel system and said that I\'ve got 2 large Walbro pumps in the tank. Not sure if the T04 is modified without taking it off. He didn\'t get the readings off the Motec yet either.

I\'m going to type up a full spec (so far) later on when I get chance and when it stops raining.

I think the breakdown so far (off the top of my head) is...

Exterior: Candy Apple Pink Magenta, Abflug front bumper, Abflug Bonnet, RE-A Mirrors, Re-A Rear wing, 17" Advan Racing Alloys, HKS exhaust (to be checked), neons, (need brand) headlight with vent/intake, coil-over shocks.

Interior: Standard black seats, half roll cage, battery in boot, Defi control unit, A-pillar pod with 60mm defi water and oil temp gauges, (insert brand) rev counter with change light, oil pressure gauge, colour-coded dash, full-closure cat 1 alarm/immobiliser with proximity sensors, Road Angel.

Mods/engine: 20B triple rotor engine, Motec M800 ECU, custom Alloy radiator, (Blitz or HKS) intercooler, 1600cc secondary injectors, 3mm drag tips, itg air filter, T-04 turbo, custom oil catch can, twin Walbro fuel pumps.

Sound System: to be confirmed.

That\'s it so far. :wave

[20B_boy]

Originally posted by Roundabout-Now
Re-A or mazdaspeed mirrors
I think they are Ganador or FEED

When you say rear arch trims, do you mean the 2 little bits added on to the sides of the bumper?
The little bits attached to the bottom of the rear arches/bottom corners of rear bumper.

I wasn\'t sure if the vents behind the front wheels were standard either?
All FD\'s have \'em mate.

Not sure if the T04 is modified without taking it off. He didn\'t get the readings off the Motec yet either.
If the car makes 800hp+ then its modified!! Best get the car checked on a wideband lambda sensor ASAP if Pip didnt do this, just to make sure u r running nice and safe mate...

(need brand) headlight with vent/intake
FEED.

(Blitz or HKS) intercooler, 1600cc secondary injectors, 3mm drag tips, itg air filter, T-04 turbo, custom oil catch can, twin Walbro fuel pumps.
Intercooler is Trust/Greddy. Not sure what these \'drag\' tips are; do you have a bill fro the engine builder? The oil catch tank is a standard Cusco job for the FD.

Hope this helps mate.

[Andyp]

Looking good bud!

I heard gods drive thier rexs with gold wheels

[iiyama]

Definatly not RE-A Mirrors, to big!!! LOL!! Not RE-A side skirts either, although they do look a little like RE-A D2\'s. Best guess from me is MS.

[GaryS]

Does look good, but I think a red rear quarter reflector would look better than the clear one.  Of course I\'d be willing to swap if you agree

[scooby_si]

& i can confirm it sounds good from both out & inside & it goes a bit too sadly wasn\'t allowed a drive but probably sensible given wot happens when i drive

I can also add my expertese thou you have "clear side indicators" http://www.smileycentral.com/?partner=ZSzeb008\' target=\'_blank\'>http://smileys.smileycentral.com/cat/5/5_3_1.gif\' border=0>
Si