Which plug and pin for the secondary injectors?

[bobert]

I\'ve just fitted 1600cc secondary injectors to my fd and I want to wire my resistors inside the car.
Can any body tell me which plug and pin at the ECU is for the secondary injectors.

[Carl]

You don\'t need to run the resistors at all.
Regards
Carl

[bobert]

They came with the kit and I see a lot of people have put them in.
Why have they supplied them if I dont need them?

[Carl]

Some ecu\'s cannot cope without the resistors being put in,but the Apexi can which I presume you are running?
Regards
Carl

[richard cash]

just the question i wanted to know, but for a different reason. Does anyone know what the wires for the injectors are??

[khyber pass]

Richard

did you get my message re: paintjob?

drop me a line

Steve

Apologies for hijack!:o

[richard cash]

I didnt get anything khyber, if you email me at richardcash@gmail.com ill definatly get something though

As far as the wiring goes, i found today that the engine end, the secondary injector wires are green/white and black/white. Then i looked at the ECU end and they seemed to be green and green/white for positives on injectors and black/white and black/blue seemed to both give continuity for the grounds of the injectors. I cant work out why this is the case??

[Fats]

I\'ve just fitted 1600cc secondary injectors to my fd and I want to wire my resistors inside the car.
Can any body tell me which plug and pin at the ECU is for the secondary injectors.

Are you running with no resistors now then?? im in the same boat and using a apexi fc

[bobert]

Are you running with no resistors now then?? im in the same boat and using a apexi fc

Not had chance to fit them due to my car being off the road (turbo problems).
I am going to put a pin in the injector plug then probe the ecu plugs until I get a resistance.
I might take a look at it this week.

[richard cash]

seems like a few people are running without resistors but i decided to use them. Bought mine from maplins for 40p each