BHP Expectations

[ReX 813]

hi,
just wondering what sort of power i can expect from my car,
its a type R2 with a street port, power f.c, induction kit, and exhaust system with de-cat which has just been fitted, its still on stock twins+injectors,
im getting it re-mapped soon but was wondering what i could push it to without causing to many problems??

cheers Jay

[Warthog]

Where are you getting the mapping done, is the first question.:wiggle

[nikp]

And: You\'re running a street ported engine without a custom map!? Dangerous.

[Bramble]

Also where was the street port done? Is it a UK port or a fictitious Japanese port?

I would think it would make 330-350 flywheel as a wild guess.

[ReX 813]

Ill be taking it to RE-WORX, the mapping was done there bout a year a go by the previous owner, it came out at 276ATW with the cat on, but i have been told the map was set to be economical, and i could get more from the car?

the port was done in the u.k.

[John Yorke]

to get the best out of it you need to address the fueling, bigger - pump, FPR and a pair of 1600 injectors. As it stands you could see around 280 / 290 atw and you will then run out of injector duty. With the fuel mods and a free flowing exhaust you should be able to push it over the 300mark.

[peterwolds]

got 305 atw on mine with additional injectors ,power fc and a walbro 255 L pump stock twins with wastegate modified

[ReX 813]

Cheers john, looks like ill have to spend my pennies on some injectors and pump in the new year,
good figure that pete, id be happy to get that :Thumbs-up