apexi pfc???

[flatty]

do these come pre programmed with a base map? is it ok to run on until i get it mapped? running decat, smic and induction

also where is cheapest to buy from with commander? been let down from who i was supposed to be buying from!

cheers
mike

[Grizzly]

The later PFC base map seems to be ok to run short term but it would always be recomended to get it set up very soon.

Sounds daft but i bought mine of E-bay new for £400 all done to my door, bear in mind though if you buy from the guy who will be setting it up often with a bit of haggling you can get a better deal (rolling road set up\'s usaly about £300 on top) alot of Places will give you a Discount of the Roller time if you buy a PFC from them.

[D1 WTF]

Sounds daft but i bought mine of E-bay new for £400 all done to my door, bear in mind though if you buy from the guy who will be setting it up often with a bit of haggling you can get a better deal (rolling road set up\'s usaly about £300 on top) alot of Places will give you a Discount of the Roller time if you buy a PFC from them.

very good point to note, alot of people dont take this into account.

[ScuttleRX]

As above ^ all the tuners sell \'em and might do you a bargain

Or here http://www.nengun.com/catalogue/product/1 is worth a look, havent used them myself but think a few on here have... (just remembered you may need to register to see the page)

[Jono FD3]

their prices are fantastic... only thing is you might get stung for import dutys!!! if you can avoid this then its a very cheep PFC!!!!

Let me know how you get on as I\'m going to be needing one soon aswell!!

Jono

[RAW]

i imported mine from greenline in japan. very efficient service and a good price.

[Sy.]

I got mine from Ebay for £400 ... and mapped for £300 . Such a noticable difference when installed and mapped .

[flatty]

found a couple on ebay for 400 so prob go for that, as for mapping there is Engine Advantages which are quite near to me and have a good reputation, they said they would map for 250-300 which seems ok to!

my car is a 1995 type r, so i take it i need the early PFC ? someone said check the date on the seat belt, and this says 1994?

driving everywhere an anywhere at the moe tryin to get it run in!

mike

[flatty]

also,,,is anyone useing the boost control kit that can be bought to go with this?
or is it better to go with another standalone unit?

[Grizzly]

as for mapping there is Engine Advantages which are quite near to me and have a good reputation, they said they would map for 250-300 which seems ok to!

my car is a 1995 type r, so i take it i need the early PFC ? someone said check the date on the seat belt, and this says 1994?

Have Engine Advantages got any Experiance with Rotarys?? They are a bit Diffrent to Boinger Motors.

Also Yes if your car is a 95 you want the 93-95 PFC (first one) They did\'nt put 16bit ecu\'s in until 96 (very few 95\'s where 16bit)