Aftermarket seats

[Sy.]

Seen lots of seats i want but they come with universal subframes and glidders as suprise they dont do Rx7 ones. Will this fit the rex with out having to have a degree in seat engineering ?

[nikp]

Apparently you have to be careful with aftermarket seats, as some have bolsters that foul on the door.

[cruiser]

What you first need to do is measure the seat you want to install. There are only FEW seats that fit into an FD. Seats shold not be wider then 21.5" or so (around 53-54cm). I\'m in search of such seats also and I tell you, it\'s hard to find anything useful. As for the rails:
http://www.technicasport.co.jp/eng/seat2.htm
http://www.more-japan.com/Nagisa-Auto-FD3S-RX-7-Super-Low-Seat-Rail-SLR-p-16314.html

I also found this, with some crazy prices
http://www.greenline.jp/catalogue/bcpartlist.php?make=Mazda&carcode=FD3S&intake=FI

[jamie_eaton]

I have these seats carbon twn skins,, yes look uncomfy but sorts my bad back out!!,, gary at rotaryart can sort you out with these, i modified and welded the stands onto the existing runners as i aint the tallest person around!!

[Sy.]

Cheers Cruiser ... i will check the measurements ... but luck i asked as would have been another thing i bought that was potentialy wrong !!

Jamie .. your seats look very expensive ... and very cool

[gmogle]

There are some awesome Bride ones that Miguel (Newera) has and they look stunning !!

Do a search on posts by him andI believe there was a price for seats and rails.

[Newera]

Thanks gmogle

I still haven\'t got around to photographing them in the car, properly - but anyways, here\'s a pic of the seats I have now...

We\'re hoping to finally release our new parts site within the next week. As ever, there\'s teething problems with the programming, but when it comes online, it\'ll offer the entire Bride range at low prices including seat rails, for purchase online via credit card or paypal...

Cheers,

Miguel

[gmogle]

Just simply beautiful !!!!

Look forward to seeing the new site mate. Hopefully you have some exhausts on there ?!!!?

[Ed_RX7]

miguel, can you pm me a price.....even if its a rough one with postage.
 
Cheers
 
Ed

[Newera]

Previously we tried these Exas III\'s in the RX-7, but in possible family planning for the future, Wife & I decided we needed to have seats that could go forwards to allow a toddler to be fitted behind someday.... so the Exas III seats were put in the AE86 instead, the Mazdaspeed seats were sold to a member here and we invested in a set of Stradia seats, as shown above for the Rex... They\'re the most expensive in the Bride range, but we can supply complete with rails at around £2,000 all in.

We can supply brand new Exas III models, complete with FD3S rails, delivered to your door at just over £1,100. No hassles in fitment - they bolt straight in - and they\'re more comfy than the flashy reclining Stradias...

A word of warning though. Exas III\'s are not for people with big waistlines...
A few larger friends have found themselves wedged and uncomfortable!
...But there are wider seats also available at the same price.

Here\'s a few pics of the Exas III\'s fitted in the AE86.

Cheers

Miguel

[Newera]

Just simply beautiful !!!!

Look forward to seeing the new site mate. Hopefully you have some exhausts on there ?!!!?

We don\'t TBH, mate - as we rarely get asked for exhausts, but we can supply anything that\'s on the market in Japan, basically - so if you really want something and it\'s not on there, please ask on the site :WaveBye

Miguel.

[Ed_RX7]

I take it the £2000 is for two?

[Newera]

I take it the £2000 is for two?

Yup, of course. We can supply single seat & rails, but it might look a little odd

Miguel

[Sy.]

Nice Seats .. but a little pricy for my small budget .
Newera - can you supply just the rails ? do they just fit the bride seat ?

[cruiser]

Do you have a pair where one is BRIDE and other is GROOM ? Polygamy isnt allowed around here

Just kiddking ofcourse

Very nice seats, but damn, that\'s a lot of money.